I tried listening to WSPR on 80m with wsjt-x 2.4.0-rc1 on Mac (Big Sur 11.2.1 Intel64). It crashes within 20 seconds or so. Tried multiple times. Pascal AC7N

#BugReport #wsjt-x-crashing #WSPR

Henk, I have a IC7610 and it has a stereo L/R RX out CODEC chip. I select on the Advanced tab for the 7610 Sound property a 2 channel 16 bit 48000 Hz (DVD Quality). I have had WSJT-X on the left chann

#AudioIssues #BugReport

The K3 will have the same audio on L/R channels unless the sub RX is turned on. What is the CONFIG:Line Out setting in your K3S? 73, ... Joe, W4TV

#AudioIssues #BugReport

Hi Rieno I am using a K3s with USB audio out. The K3s has a main and sub receiver with separate L and R audio. 73 Henk -------- Oorspronkelijk bericht -------- Van: Reino Talarmo <reino.talarmo@kolumb

#AudioIssues #BugReport

Henk, Just for interest which USB audio device you are using for your USB input? Is it a rig, Signalink or similar or some audio dongle? If the last one, which type or maker? 73, Reino OH3mA

#AudioIssues #BugReport

Henk, several other users and I have confirmed that WSJT-X correctly reads from stereo channels as specified in the "Settings->Audio" panel. My test was rigorous and found no fault in the implementati

#AudioIssues #BugReport

Bill, Good to hear there is no problem in WSJT. However, my problem is WSJT specific. All other applications work OK with the same WIN10 settings/ports. So the question becomes: - where and in what fi

#AudioIssues #BugReport

Henk, I have just double-checked this using a tone generated by Audacity and played by through VAC to WSJT-X. I can select left channel input in "Settings->Audio" and swing the playback balance in Aud

#AudioIssues #BugReport

Works as designed here using K3 and microHAM MK III. Suggest you investigate your audio device and Windows settings further. Microphone inputs are notorious for ignoring settings and operating in sing

#AudioIssues #BugReport

Henk Works for me on 2.3.0. Have you got the Sound Properties configured correctly? Sometimes a "Mic" is mono, you have to get "Line In" working. 73 Alan G4ZFQ

#AudioIssues #BugReport

It is not possible to choose Left or Right audio channel in 2.3.0. and 2.4.0 rc1. Both audio channels have the same content. Using USB audio input. Other applications have no difficulty using the same

#AudioIssues #BugReport

Chris & Reino I did check this issue by simulation, see below, no problem was detected. Amos 4X4MF

#FT4 #BugReport

>I have to disable TX manually select the next transmission, then re-enable TX. If I'm quick enough, I can select the next step before it starts transmitting. Chris, Do you mean that ”Now” buttons don

#FT4 #BugReport

I have been using this program successfully on all modes using the Raspberry Pi Buster OS. Today, I decided I would switch over to FT4 since I saw some stations on there. I saw the first station calli

#FT4 #BugReport

Please follow instructions found in the User Guide for reporting bugs: https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.4.0-rc1.html#_bug_reports Most important is the final requir

#wsjt-x-crashing #BugReport

It seems that this isn't a problem with running two instances of WSJT-X V2.4.0-rc1, it seems to be another example of the JT4 decoding bug. I had selected JT4 as, although this is the display of the C

#wsjt-x-crashing #BugReport

I'm trying to set up two instances of WSJT-X (V2.4.0-rc1) to monitor the Main and Sub bands on my IC-9700. I have set up the 9700 to output both channels of audio to the USB port and have used the 'ri

#wsjt-x-crashing #BugReport

It seems that the problem that I just posted under another topic where I was trying to run two instances of WSJT-X from two separate configurations is another instance of the JT4 decoding issue. I tri

#BugReport

Try looking at the sound card settings: Echo Suppression and Noise Cancellation. The W10 updates often turn those on which causes my waterfall to fill with solid pixels and appears to have gone deaf.

#AudioIssues #Cat_RigControl #BugReport

Wow! Thanks Bill. This isn't good news obviously, but it confirms my suspicion that its a windows issue most likely introduced with an update gone wrong. If you have any hints I'd love to hear them. O

#AudioIssues #Cat_RigControl #BugReport