Hi. GPS locked (disciplined) frequency standards generally have more stringent requirements above that a 1PPS system can use regarding antenna location for good performance. But, if you can locate the

Re Flrig. It does indeed work well over a LAN, so long as any per/machine firewall etc let's the traffic through. 73. Dave G0WBX

But he doesn't now need to rely on the internet for time. So in the event of i'net "wobbles" WSJTx can keep on rolling. Plus, good for portable use too. 73. Dave G0WBX

Hi Kari. Retired eh, lucky you!. As you've probably seen, It's largely sorted now, thanks to Bill's and your comments together. Joining the dots etc. Re Python on Windows. If needed, it's an easy inst

OK. What I ended up doing. Outside of WSJTx, when it was not running, I made two copies of the "main" .ini, the "normal" one with three "configurations" within it. I renamed each copies as I want. Lau

Hi. For sound-card problems immediately after a windows update. It would be wise to re-check the privacy settings for the microphone and other devices. Also, check just "how" Windows enumerated everyt

OK Kari. As you seem to have much more free time than I do at the moment, and possibly deeper knowledge about it all, I'm formally handing you the baton to figure out how to reliably export all of a "

Of course, if you copy one file to another, they will be the same. Now.. With no "copied" "named" .ini's. Start WSJTx with a --rig-name=testrig command tail. (For example.) It will start as if it was

Re:- ..why not just use 'informal' way of copying the single instance WSJT-X.ini? Open a command prompt in the configuration directory ~/.config and issue the magic 'cp' command, for example: cp WSJT-

Secondly, anyone know if a Windows restore would do the trick? Lastly, anyone have a solid TS590SG set of configurations for a setup with Signalink that might work? I have tried a variety of them and

Hi All. OK, so it is intentional that there is no formal way to move or copy "configuration" settings, from the single instance mode of running the program, to the .ini files of the independant or "Is

I have been successful in copying my WSJTX config setup to a second desktop icon, and making the changes for the different rig. I just open the correct desktop icon for the appropriate rig. My rigs ar

Dan. Sadly... Another way is to copy a desktop short cut for wsjtx, then modify it by adding the --rig-name=xxx. Doesn't work, it starts up, but totally un-configured, as if it's a fresh/new install.

the answer to your question is right there in the WSJT-X User Guide section you have quoted. Note that name of the directory and the name of the .ini file both contain the 'xxx' string passed to WSJT-

Hi. WSJT-x V 2.1.2 On Linux Mint 19.3 64 bit. For some time now, I've had separate "profiles" for the two radios I use. (A TS870 for HF, and FT736 for VHF.) While I've got time on my hands during "iso

Re:- Except, I challenge anyone to show me a MS manual on any update; ever! They don't exist! Oh they do, but they do take a lot of digging and unearthing to find out the full official details, but th

Hi. There was indeed one windows update KB4532693 that only partly completed the job, it did the update bit, but failed to restore normal operating profiles, so many users found that all their data ha

If you're going to get serious over timekeeping from GPS, use a Raspberry Pi (or similar) with a GPS receiver that has PPS output, and make yourself a portable true NTP server. See Dave Taylor's "sats

Do you have any powered PC speakers? Could they be picking up your TX RF? I used to get rumbling noises out of one PC the other side of the shack (connected to AC Line, but shutdown) when I run Olivia

You can usually increase the font size per application. Many email / list readers will do that if you use Ctrl+Shift and the '+' symbol. (use Ctrl and '-' to reduce font size.) There are also often ot