Hi Got a strange logging error with the start time of a QSO. We definitely didn't start the QSO at 12:45 I did a look in All.txt and AB4IQ answered my CQ at 13:16. Using WSJT-x 2.2.0, Raspberry versio

Hi I have over the years used a RPI for WSJT-X, mostly for FT8 and MSK144. The "speed" of the RPI is on the margin but when #4 was introduced I had no issues to run WSJT-X in deep mode and with AP. Wi

#general

I have exactly the same problem. Suddenly no CAT commands to the PA (SPE Expert) for correct frequency when changing band in WSJT-X. When I adjust the RIG VFO, no problem. I have not changed anything

#Cat_RigControl

Did a test with an old version v2.0.1, yes old. CAT works perfectly to my Rig and PA ! When I change band in WSJT-x the band is also changed on the Rig and PA ! 73/Bengt, SM6MUY

#Cat_RigControl

Hi Yes, I had that on another PC. But this worked fine until 2.4 was released. Win 10, IC-7300, SPE Expert 1.3k. USB interface from PC to rig. Normal CI-V interface to PA (from rig). 73/Bengt

#Cat_RigControl

Hi Yes Transceive is on. As I said, Cat works fine between PC and rig, but the PA does not shift band when I change band in WSJT-x, only the rig change. This worked before version 2.4 where both units

#Cat_RigControl

Hi I have not changed the PA firmware. I have not changed the rig firmware. I have updated WSJT-x. If the "feature" in WSJT-x with changing the rig frequency and the PA frequency at the same time wasn

#Cat_RigControl

In WSJT-x below. USB connection between PC and rig. In the rig , almost no settings, just default. Yes CI-V "Transceive ON". Don't know if it's needed for WSJT but I think for the PA. The PA (SPE Expe

#Cat_RigControl

Hi Yes, when I realized I had this problem I did a search and found your thread Frode. I have the IC-7300. But not the latest firmware (I have 1.30). I don't have the "output" setting. But when realiz

#Cat_RigControl

It works for some. But not for all. I have the IC-7300, not the 7600. Don't have that ANT setting. No problems until I installed V2.4.0. I friend of mine also have the IC-7300. No problems for him. Ex

#Cat_RigControl

Hi Upgraded and I have CAT issue now from time to time. Hamlib error and it doesn't help to do "retry" which worked before. The frequency setting is 0.000. The only fix is to restart the PC. Very anno

#hamlib

Normally it works fine. But if I start to "play" with the radio, IC-7300 WSJT-X "complains after a while (loosing the connection). It's not any new thing. Always been like that. But before it was just

#hamlib