Have WSJT-X working on RX but cannot get TX working. TX config screen shot attached. I had previously set up the IC-7610 to work with N1MM+ and a single USB cable for logging, CW, FSK RTTY and recoded

Using the instructions at rttycontesting.com to set up WSJT to work with N1MM+ and my IC-7610. As recommended I installed and configured WSJT v2.2.1 yesterday and had it operating stand alone and made

I have never used FT4, but recall at Hamvention in 2019 after the initial FT4 trials there was discussion about FT4 possibly being available in asynchronous mode for contests. Was that ever enabled? T

Reino and Bill, Thank you very much for the updated information. I’ll listen for FT4 and look forward to trying it. Other that 50.318 do you have a recommendation for what HF band I should try? 73, Ta

I downloaded WSJT-X v2.4.0 and configured it to work with my IC-7610 - using my settings for N1MM+ as a guide. I am able to decode stations using FT8 on 50.313 but the radio will not TX. I have Enable

I downloaded WSJT-X v2.4.0 and configured it to work with my IC-7610 - using my settings for N1MM+ as a guide. I am able to decode stations using FT8 on 50.313 but the radio will not key the transmitt

#transmit

I downloaded WSJT-X v2.4.0 and configured it to work with my IC-7610 - using my settings for N1MM+ as a guide. I am able to decode stations using FT8 on 50.313 but the radio will not key the transmitt

#TechnicalHelpQuestion

I am up and running on v2.4.0 with JTAlert and DXLab Suite integration and have made several contacts with FT8 on 50 MHz, and have a couple configuration questions please. I am sending my Grid Square

#WSJTX_config

That worked - thank you Lance! 73, Tad, K3TD

#WSJTX_config

What is the recommended AGC setting on the 7610 for the WSJT modes? Thanks and 73, Tad, K3TD

#WSJTX_config

I will be using my new FT-991A with WSJT-X mode MSK144 on a Windows 11 HP laptop for the first time the weekend of 8/12 for the North American Meteor Scatter Digital Sprint. https://kv5w.com/2022/07/2

#MSK144 #NewUser

Thank you Lonney! 73, Tad, K3TD

#MSK144 #NewUser

Where can I get detailed info on the logging functionality built into WSJT-X? I would like to learn what contact info can be retained and how, and whether that info can be uploaded as a ADIF file to a

#logging

I made a whopping 3 contacts in the NA Meteor Scatter Sprint - it was my first ever use of MSK144 and I wanted to test to make sure I had WSJT-X and my FT-991A communicating properly. How can I genera

#adiFiles

Thank you Reino, Unfortunately I was not smart enough to do that. What I do have is the log of 3 contacts saved in WSJT-X under File / Open Log Directory which opens up under my WSJT-X folder as: Tad

#adiFiles