I was idly watching 40M FT8 tonight, as you do, and I spotted a station calling CQ on two frequencies, in the same band, at different time slots and I wondered why?

Sounds like RF getting into the PC. Not sure what type antenna that you are using, but some ‘multi band’ designs result in high RF levels in or close to the shack. Sometimes it’s a result of the lives

Still no update here...

#FT8

On 6M the solution has been another "DX" frequency. So now there is 50.313MHz and 50.323MHz and, yes, the DX Police have been seen to be active on 323 as well... It's like 50.110MHz all over again. LO

#FT8

Hi, I was discussing, via email, problems with logging old modes with a logbook program author (It was JT8 that was the problem on an export from a previous logging program that I'd used in the past)

#logging

You can import the WSJT-X log file called "WSJT_log.adi" into Log4OM2 directly. In Log4OM2 use "File>Import ADIF" then 'Load' and go to where the WSJT_Log.adi file is located (In WSJT-X you can find w

#logging

Thanks Neil, Does that mean an update to ADIF will be available to logging programs as well? If so, I'll email the guy who wrote the one I use and see if he has been able to get an update. Cheers - Da

#logging

I've used the hastag "BugReport" as there didn't seem to be anything else that would cover this. Using Q65 today someone, on one of the KST Chat rooms, mentioned that it was taking a long time from th

#IssueReport

WSJT-X v2.4.0 RC-1 keeps crashing on me with a report "Sub-process error failed to close orphaned jt9 process" when I click on "OK" another error box comes up "Fatal error Sub-process error". The only

#wsjt-x-crashing

Thanks Bill, I've been using Task Manager to kill the JT9 process today. Several crashes using 15A but not so many using 30A. I did notice that it seemed to have defaulted to "Deep" mode rather than "

#wsjt-x-crashing

I made up a seperate shortcut to launch WSJT-X in 'Dark' mode from the instructions I found at http://gm6nx.com/?p=1281 Now I can launch either syle of display that I fancy using. Hope it helps - Dave

#WSJTX_config

I did a quick test toggling the "Sh" box and the "Tx6" box. I guess that "Sh" stands for 'Shorthand', as in the Shorthand messaging used in other modes? So, clicking on "Sh" changes Tx4 to "@1500(RRRR

#WSJTX_config #Q65

Hi Rex, No, they don't, at least not in some modes of Q65. For example, Q65 30A looks like this with Sh selected...

#WSJTX_config #Q65

Yes Bill, I agree, but that's not what many operators who are testing Q65 seem to be expecting... They are, maybe wrongly, assuming that Q65 will somehow replace FT8 or FT4. Much of the testing, that

#WSJTX_config #Q65

There's been a lot of excitement and expectation that has been created by the release of the Q65 series of modes, in my opinion. There's been chatter about these being "the next new..." enter your mod

#Q65

In Europe 50.275MHz is not ideal as it is in the section marked in the Region 1 Bandplan as 50.200-50.300 2.7 kHz SSB/Telegraphy - General Usage 50.305MHz is marked as "50.305 MHz PSK Centre of Activi

#Q65

It was happeneing to me yesterday when trying to decode a couple of 23cm beacons that run JT4g. I'm running Windows 10 Pro on an Intel i5, 3.2GHz with 4GB RAM, if that helps? Today, when I swapped fro

#IssueReport

Thanks for the reply, Charlie, I'll look into setting up different configurations as well. Cheers - Dave (G0DJA)

#IssueReport

It seems that the problem that I just posted under another topic where I was trying to run two instances of WSJT-X from two separate configurations is another instance of the JT4 decoding issue. I tri

#IssueReport

I'm trying to set up two instances of WSJT-X (V2.4.0-rc1) to monitor the Main and Sub bands on my IC-9700. I have set up the 9700 to output both channels of audio to the USB port and have used the 'ri

#wsjt-x-crashing #IssueReport