Hello, I'm running two instances of wsjtx 2.1.2 gui on a Pi 3B+ Stretch, and all is fine initially. However, after a while one instance stops decoding FT8 (the other keeps going). To get it started ag

Hi Bill, I mean a usb sound card with stereo mic input, one for each wsjtx instance so I can decode 2 FT8 streams simultaneously.

Hi Bill, Actually I'm not using pulseaudio (uninstalled it) since I thought it interfered with alsa. I do get error messages on startup in terminal window about this pa_context_connect() failed, but t

Hi Bill, I've re-installed pulseaudio and set the default sample rate as 48000 (previously this was set as alternate sample rate) in daemon.conf and re-started the daemon. I'm running both instances a

Hi Bill, This time both instances ran for ~10 hours (several times longer than before) but after that the same one stopped 'listening' again leaving just one. Clicking 'Monitor' off/on re-started it a

...don't think so. I'm not txing and cables are screened and I've tried different sound card combinations (one stereo in and two mono in). Also once it 'freezes' it remains like this until monitor but

will do..

Hi Bill, I'm running pavucontrol in the gui and have the panel. Looking at the input tab shows the Microphone ports with a slider, but not sure how to interpret this. The sliders just seem to be volum

Hi Bill, With both wsjtx instances running, the recording tab says 'no application is currently recording audio' ? This is for applications and all streams. Is this working correctly? Greg

...could this mean that wsjtx instances are not using pulseaudio?

Hi Bill, I don't know. They seem to work (for a while anyway.) I have checked /proc/asound/modules for the addresses of the two cards plus lsusb. But thinking about it asound belongs to alsa doesn't i

Hi Bruce, Using pavucontrol panel, I get no applications are recording, so I don't think my instances of wsjtx are using pulseaudio drivers. Greg

Hi Bill, A couple of issues: 1)I tried running two instances of wsjtx from same sound card mono input. I would expect identical decodes but was getting differences in signal strength and one or two st

Hi again Bill, Been educating myself and realise that ALSA is kernel low level sound mixer and can either work on its own or be used with PA which sits on top of ALSA, so not a good idea to remove ALS

Hi Robin, I don't get that option on the list. However I have two instances running now each from a separate usb card decoding FT8 on 40 and 2m, so I think I've selected the correct options. In the ma

Hi Built and used WSJT-X v2.1.2 on Pi3 Stretch with no problems. Built v2.2.2 from tarball and now get hamlib error 'Target VFO unaccessible while getting current frequency' and no PTT control either.

Hi, Just read Bill's reply on another thread on same issue. Yes specifying FT857 instead of my actual radio (FT897) did the trick. Now only probelm I have with this build is no tx audio. Sound card ap

Hi Joe, I have an FT897 and got the hamlib error when I updated to 2.2.2 from 2.1.2. Selecting FT857 worked for me also. Greg g4cui

Hi, Have been running v2.1.2 on a Pi3 Stretch with usb soundcard with no problems. However with v2.2.2 which I built from tarball, I have no tx audio using same usb soundcard and settings as for v2.1.

Hi Bill, Thanks for the reply. Yes, I installed that when building v2.1.2 which worked fine. Nothing else on Pi3 has changed, except for building 2.2.2 tarball. Don't know why the 'mic' works ok (I ca