I am trying to run frequency calibration. Before starting there was no fmt.all file in the WSJT-X log directory. Running frequency calibration seemed to work, but some frequencies had insufficient sig

#FreqCal

I am puzzled by the waterfall display in MSK144. A line is displayed that seemingly indicates a signal of constant amplitude. When conditions are quiet I can hear an audio beat note that changes as my

#MSK144

Thanks Reino. I should have been able to figure that out, but somehow I didn't. Maybe old age is taking a toll on me! John, W0GN

#MSK144

How can I set up the local user guide? I'm using v. 2.5.2 on a Raspberry Pi-4b I do have the On Line User Guide as a file in the documents folder. It works if opened from the Documents folder, but I c

#TechnicalHelpQuestion #raspberryPi

Bill, Attached is what I get when I select Local User Guide from the WSJT drop-down menu. Can you confirm that my error is not normal? I'm using a Raspberry Pi 4b & inexpensive HDD. I thought there mi

#TechnicalHelpQuestion #raspberryPi

Thanks for the info Kari. That worked for me, but I did have to change the name of the downloaded on line help file from the drop-down box in WSJT-X that saved as WSJT-X User Guide.html to wsjtx-main-

#TechnicalHelpQuestion #raspberryPi

What sort of AGC are you using? Could a strong signal lower the gain so much that the weaker signal no longer decodes? You could try turning off the AGC and setting the RF gain for about 30 dB when no

#FT8

I use an IC-7300 with an old Viking Matchbox to tune my flattop antenna system. Without even using the IC-7300, if I set the Matchbox so there is some VSWR and vary the TX power the SWR does change. T

#Icom

If you turn the RF gain control on the IC-7300 past about one o'clock that activates the squelch. When you do that there is a small triangular pointer on the S-meter display that shows the amount of s

#Icom #macOS

Many of the Field Day QSOs that should have been completed were using the shortened method. If WSJT-X didn't progress through to the point the log applet displayed, I kept going three times or so and

#TechnicalHelpQuestion