Hello All, I am having trouble with my band changing. Right now I am running MacOS Big Sur and 2.5.0 rc1 and it will not change bands as long as I change the bands on the radio all works fine. I can r

#band

Need more info ... as in what rig are you using, what do you ave for CAT control, etc . Neil, KN3ILZ

#band

Thanks for the reply, I am running MacOS Big Sur, IC-7300, WSJT-X v2.5.1 right now. It is with this setup that will not change bands. My Computer did an upgrade and everything started then. I can go b

#band

Strangely I have heard no FT8 activity at all on 7.071 or 7.074 for at least 2 weeks. The problem isn't with either of my two transceivers--40 meters is otherwise alive and active on them but on 7.071

#band #wsjt-x

Strangely, for at least the last 3 weeks, I've been unable to find FT8 activity (or any activity for that matter) on 7.071 or 7.074. I have tuned there during both day and nighttime hours using two di

#band #FT8

Hi Jim, is you rig on USB? 73 Bill G4WJS.

#band #FT8

Try calling CQ? Is your antenna OK? William Smith ComputerSmiths Consulting, Inc. w_smith@...

#band #FT8

Lots of FT8 on 40M in the evening and night time hours. Do you have the correct mode set up in your rig? Correct sideband? I assume that you listened as well, however with the wrong mode, the frequenc

#band #FT8

There has been activity so my first choice would be to be on 7074 and make sure its USB. If your on LSB you may not here anything. Darl NA8W

#band #FT8

After calling some cq does your callsign show on pskreporter? 73

#band #FT8

Definitely an equipment situation. There has been lots of activity on 40M. Even during the last geomagnetic storm we had a month ago or so I could copy a few stations on 40M (although admittedly is wa

#band #FT8

I am going to try this again, I am running a MacOS Big Sur, IC-7300, with WSJT-X. I can start WSJT-X v2.3.1 and everything is ok. If change bands on WSJT-X 2.3.1 the 7300 changes bands. I close v2.3.1

#band

Hi Jim, please put the attached file into your WSJT-X configuration files directory (on macOS that is ~/Library/Preferences), then restart WSJT-X and do a minimal test that demonstrates the issue. In

#band

Your radio perhaps hasn't selected a dummy load or no antenna for that band has it? There is lots of FT-8 activity on 7.074. 73 Bob, K4TAX

#band #wsjt-x

Jim .... it is easy to conclude there is no activity. But look at the vertical bar on the left side of the screen. Adjust it down where it is not stuck at the top. When it is swinging from 60 to 80, t

#band #wsjt-x

I cannot figure out what I am doing wrong, I can transmit OK at least I think I am as I see my radio Yaesu FT991A key up also I was under the impression the transmit is only 15 sec mine is 60 sec. My

#WSJTX_config #band #NewUser

When the waterfall shows activity and there is no decodes, it means your omputers time is not accurate enough. Go to https://time.is and check your time. Instruction suggest to install Meinberg ntp, o

#WSJTX_config #band #NewUser

I believe he also said he was transmitting 60 second periods, so he is also on the wrong mode or sequence timing. Gary - AG0N

#WSJTX_config #band #NewUser

What mode is selected? Some modes are 15 seconds, some are 30, some are 60, there are even modes that will transmit for 5 minutes (300 seconds). If you see activity on the waterfall but nothing is dec

#WSJTX_config #band #NewUser

sound like you are not in ft8 or ft4 mode. check mode tab Dave Garber VE3WEJ / VE3IE

#WSJTX_config #band #NewUser