You can do it with a text editor or the free ADIF Master program.

73

-Jim
NU0C

On Fri, 04 Jun 2021 08:37:47 -0700
"n2_ss" <n2ss@...> wrote:

I made some Q's on a different platform and then entered that QSO data into wsjtx_log.adi on my main platform. So, that file contains data that is now not in the wsjtx.log file. Any way to synchronize the 2 files without having to enter the data manually into the wsjtx.log file? Tried "Rescan ADIF Log" that didn't help; neither did turning "Show DXCC, etc" off and on. Figured this can't be a new question so I tried searching the group messages but no help here either, at least with the search terms I used. Can anyone help?
Thanks
Tony N2SS

On 04/06/2021 16:37, n2_ss wrote:

I made some Q's on a different platform and then entered that QSO data into wsjtx_log.adi on my main platform. So, that file contains data that is now not in the wsjtx.log file. Any way to synchronize the 2 files without having to enter the data manually into the wsjtx.log file? Tried "Rescan ADIF Log" that didn't help; neither did turning "Show DXCC, etc" off and on. Figured this can't be a new question so I tried searching the group messages but no help here either, at least with the search terms I used. Can anyone help?
Thanks
Tony N2SS

Hi Tony,

the wsjtx.log file is output only from WSJT-X, unless you particularly need it to be complete I would not bother to update it.

73
Bill
G4WJS.

On 04/06/2021 14:09, Ron McMurdy wrote:

en_US.utf8

73
Ron

Hi Ron,

thanks for that, unfortunately that means the problem is not what I thought it might be. I don't think you have said which verison of WSJT-X you are running, please conform?

73
Bill
G4WJS.

--

I made some Q's on a different platform and then entered that QSO data into wsjtx_log.adi on my main platform. So, that file contains data that is now not in the wsjtx.log file. Any way to synchronize the 2 files without having to enter the data manually into the wsjtx.log file? Tried "Rescan ADIF Log" that didn't help; neither did turning "Show DXCC, etc" off and on. Figured this can't be a new question so I tried searching the group messages but no help here either, at least with the search terms I used. Can anyone help?
Thanks
Tony N2SS

Thanks.

Some other sites suggest this type of fault can occur if FLrig doesn’t return a string when a string is expected.
https://www.unix.com/programming/264509-segment-fault-related-strlen.html

OK, thanks!  Think the program and radio now setup correctly!  When I change to the USB-data it did modulate, now Im left with figuring out how the rf is getting into computer!  But I think the program and radio properly setup.

Thank you!

tim

en_US.utf8

73
Ron

On 04/06/2021 15:18, Tim wrote:

So, I changed all the modes to USB, and yes transmits (and rf in shack returns), however, then I cannot use my mike for voice modes.

It appears that data off mod if set ot usb allows wsjt-x to transmit but prevents me from using normal voice, if I change to MIC-ACC voice works but no transmit from the software.  I KNOW this worked at one point, and I did not have to change the Data off mod to Mic/Acc or USB when I wanted to use WXJT-X.

I have verified SWR is less than 1.5 to 1 on antenna, so not high swr causing rf in shack issue.

Thanks.

Tim,

you should be using USB-DATA mode with WSJT-X, the DATA MOD settings on your rig (DATA1 MOD on the IC-7600) affect that and do not affect the DATA OFF settings with apply to normal USB usage. Check the "Settings->Radio->Mode->Data/Pkt" option is WSJT-X to have it automatically select USB-DATA mode on your rig.

73
Bill
G4WJS.

So, I changed all the modes to USB, and yes transmits (and rf in shack returns), however, then I cannot use my mike for voice modes.

It appears that data off mod if set ot usb allows wsjt-x to transmit but prevents me from using normal voice, if I change to MIC-ACC voice works but no transmit from the software.  I KNOW this worked at one point, and I did not have to change the Data off mod to Mic/Acc or USB when I wanted to use WXJT-X.

I have verified SWR is less than 1.5 to 1 on antenna, so not high swr causing rf in shack issue.

Thanks.

On 04/06/2021 14:53, Tim wrote:

SO yes it does look like the RF was getting into computer, I have helped that issue.

One question, the software is communicating with the radio, however, when it transmits, radio does go into transmit mode, it appears to not be sending audio/signals?  Is there something to check?

Thanks!!!

Tim

Tim,

lack of Tx audio may be due to incorrect rig settings. Typically on Icom rigs there is a menu setting to determine the source of Tx modulation in USB-DATA modes, by default i is usually ACC and should be changed to USB if using a USB connection between rig and PC for audio.

BTW it seems strange that you are having RFI issues if you have no Tx audio.

73
Bill
G4WJS.

SO yes it does look like the RF was getting into computer, I have helped that issue.  

One question, the software is communicating with the radio, however, when it transmits, radio does go into transmit mode, it appears to not be sending audio/signals?  Is there something to check?

Thanks!!!

Tim

On 04/06/2021 14:38, Walt (KK4DF) wrote:

CORRECTION:  I am able to get my K2 running directly from wsjtx.  So I may not have to "solve" this problem for now.  Thanks for all your help.

Hi Walt,

thanks, that seems to isolate the issue to the Flrig backed of Hamlib. The cause of the crash is not obvious as it is triggered in an unrelated thread of WSJT-X, perhaps some memory corruption due to a coding error in the Hamlib Flrig interface has caused the problem.

73
Bill
G4WJS.

CORRECTION:  I am able to get my K2 running directly from wsjtx.  So I may not have to "solve" this problem for now.  Thanks for all your help.

On 04/06/2021 14:25, Walt (KK4DF) wrote:

I've not been able to control the K2 directly from wsjtx.  I can control my FTDX101D directly from wsjtx, or using FLrig with not problems.  When I try to control the K2 using FLrig, I get the crash.

BTW, I have no problems using FLrig to control my K2 when running FLdigi.  The crash only occurs when controlling the K2 using FLrig from wsjtx.

Hi Walt,

ok, but I am trying to establish where the problem might lie. What happens when you try and control your K2 from WSJT-X directly?

73
Bill
G4WJS.

I've not been able to control the K2 directly from wsjtx.  I can control my FTDX101D directly from wsjtx, or using FLrig with not problems.  When I try to control the K2 using FLrig, I get the crash.

BTW, I have no problems using FLrig to control my K2 when running FLdigi.  The crash only occurs when controlling the K2 using FLrig from wsjtx.

On 04/06/2021 14:05, Walt (KK4DF) wrote:

Same results after the update and dist-upgrade commands.  lib1t5core5a:arm64 (and :armhf) is installed.

Hi Walt,

ok, does direct rig control of your K2 from WSJT-X work correctly?

73
Bill
G4WJS.