|
Locked
Re: Hamlib version in Help->About WSJT-X
#EnhancementReqest
Bill,
I was looking on my laptop I use for my logger development. It maybe different on my shack desktop. Sorry.
73 Phil GM3ZZA
Sent from Mail for Windows
From: Bill Somerville
Sent: 13 September 2021 19:49 To: main@WSJTX.groups.io Subject: Re: [WSJTX] Hamlib version in Help->About WSJT-X #EnhancementReqest
Hi Phil,
it should be there, a line looking something like this: [RIGCTRL][2021-05-22 16:27:31.757882][00:00:00.773225][info] Hamlib version: Hamlib 4.2 Mon May 17 02:40:24 2021 +0000 SHA=cdad07 appearing a few lines after a line looking something like this one: [SYSLOG][2021-05-22 16:27:30.991620][00:00:00.007251][info] WSJT-X v2.4.0 c19d62 by K1JT, G4WJS, K9AN, and IV3NWV - Program startup 73
On 13/09/2021 19:41, Philip Rose via groups.io wrote:
-- 73 Phil GM3ZZA |
|
|
|
Locked
Re: Hamlib version in Help->About WSJT-X
#EnhancementReqest
Hi Phil,
it should be there, a line looking
something like this:
[RIGCTRL][2021-05-22 16:27:31.757882][00:00:00.773225][info] Hamlib version: Hamlib 4.2 Mon May 17 02:40:24 2021 +0000 SHA=cdad07 appearing a few lines after a line
looking something like this one:
[SYSLOG][2021-05-22 16:27:30.991620][00:00:00.007251][info] WSJT-X v2.4.0 c19d62 by K1JT, G4WJS, K9AN, and IV3NWV - Program startup 73
Bill G4WJS. On 13/09/2021 19:41, Philip Rose via
groups.io wrote:
|
|
|
|
Locked
Re: Hamlib version in Help->About WSJT-X
#EnhancementReqest
toggle quoted message
Show quoted text
From: Bill Somerville
Sent: 13 September 2021 16:16 To: main@WSJTX.groups.io Subject: Re: [WSJTX] Hamlib version in Help->About WSJT-X #EnhancementReqest
On 13/09/2021 16:00, Philip Rose via groups.io wrote: > Would it be possible to include the version of hamlib built in displayed in the About WSJT-X window, please. > > -- 73 Phil GM3ZZA
Hi Phil,
that information is available in the wsjtx_syslog.log file in the WSJT-X log files directory ("Menu->File->Open log directory"). Scroll to near the end to see the application startup log messages which include the Hamlib version being used.
73 Bill G4WJS.
-- 73 Phil GM3ZZA |
|
|
|
Locked
Re: Brackets <> for long call signs
On 13/09/2021 16:21, Florian Wolters (DF2ET) wrote:
Hej guys,Hi Florian, see the WSJT-X User Guide here: https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.4.0.html#COMP-CALL for details of how non-standard calls are handled. 73 Bill G4WJS. |
|
|
|
Locked
Brackets <> for long call signs
Hej guys,
I hope someone can point me in the right direction. I did answer some CQ calls from stations with long callsings e.g. DL/OE5DRP. I double-click the call and WSJT-X generates the standard messages as shown here: https://pasteall.org/pic/40673cfca17f4a23a19e9842e473f9d6 If I TX messages 4 or 5 it happens that obviously only the DX callsign gets transmitted correctly. Also the brackets <> are around my call in TX messages 4 and 5. Is that a mistake? Or am I doing something wrong? vy73 de Florian DF2ET -- Florian Wolters, DF2ET LOC: JO31ol https://www.qrz.com/db/df2et https://www.n18.de |
|
|
|
Reino Talarmo
>for the life of me I cannot even find my wsjtx.log file! Arnold, If you really want to find it, just go to route File – Open log directory and it should be there as “wsjtx_log.adi” or “wsjtx_log”, if your file extension are hidden. At least for the current instance of wsjt-x. 73, Reino OH3mA
|
|
|
|
Locked
Re: RX offset continually increases.
#reception
#IssueReport
Bill,
Yes but I don’t think it was RFI getting in. It was independent of TX/RX state, and hasn’t happened since. Decodes seemed to happen OK.
Phil.
Sent from Mail for Windows
From: Bill Somerville
Sent: 13 September 2021 16:17 To: main@WSJTX.groups.io Subject: Re: [WSJTX] RX offset continually increases. #reception #IssueReport
On 13/09/2021 15:58, Philip Rose via groups.io wrote: > This appears to be a one-off, but at some point this afternoon, I noticed that the RX offset just kept increasing. I tried copying TX to RX, but it started again. Using the up/down button had similar affect. Restarting WSJT-X fixed it. > > WSJT-X 2.4.0 > -- 73 Phil GM3ZZA
Hi Phil,
were you transmitting and making QSOs at the time this was happening?
73 Bill G4WJS.
-- 73 Phil GM3ZZA |
|
|
|
Locked
Re: RX offset continually increases.
#reception
#IssueReport
On 13/09/2021 15:58, Philip Rose via groups.io wrote:
This appears to be a one-off, but at some point this afternoon, I noticed that the RX offset just kept increasing. I tried copying TX to RX, but it started again. Using the up/down button had similar affect. Restarting WSJT-X fixed it.Hi Phil, were you transmitting and making QSOs at the time this was happening? 73 Bill G4WJS. |
|
|
|
Locked
Re: Hamlib version in Help->About WSJT-X
#EnhancementReqest
On 13/09/2021 16:00, Philip Rose via groups.io wrote:
Would it be possible to include the version of hamlib built in displayed in the About WSJT-X window, please.Hi Phil, that information is available in the wsjtx_syslog.log file in the WSJT-X log files directory ("Menu->File->Open log directory"). Scroll to near the end to see the application startup log messages which include the Hamlib version being used. 73 Bill G4WJS. |
|
|
|
Locked
Hamlib version in Help->About WSJT-X
#EnhancementReqest
Would it be possible to include the version of hamlib built in displayed in the About WSJT-X window, please.
-- 73 Phil GM3ZZA |
|
|
|
Locked
RX offset continually increases.
#reception
#IssueReport
This appears to be a one-off, but at some point this afternoon, I noticed that the RX offset just kept increasing. I tried copying TX to RX, but it started again. Using the up/down button had similar affect. Restarting WSJT-X fixed it.
WSJT-X 2.4.0 -- 73 Phil GM3ZZA |
|
|
|
Arnold Lausevich <nk9o@...>
for the life of me I cannot even find my wsjtx.log file!
On Monday, September 13, 2021, 09:46:16 AM CDT, Bill Somerville <g4wjs@...> wrote:
On 13/09/2021 15:28, w1cu@... wrote: > Is there a way to open the wsjtx.log.adi with the most recent contacts > at the top? > Jonathan > w1cu@... Hi Jonathon, the WSJT-X ADIF log file is just a text file and new entries are appended to the end. Unless you have some application that can read the whole file, understand the ADIF record format, and sort the data the way you want it; you are not going to get that. ADIF is a format for transferring log records from one application to another. Importing the ADIF file into a station logging application will allow you to search the records etc.. 73 Bill G4WJS. |
|
|
|
Robie - AJ4F
Jonothan, ADIF Master is designed to manipulate ADIF files. It is free and may do what you want. Robie - AJ4F On Mon, Sep 13, 2021 at 9:46 AM Bill Somerville <g4wjs@...> wrote: On 13/09/2021 15:28, w1cu@... wrote: |
|
|
|
On 13/09/2021 15:28, w1cu@... wrote:
Is there a way to open the wsjtx.log.adi with the most recent contacts at the top?Hi Jonathon, the WSJT-X ADIF log file is just a text file and new entries are appended to the end. Unless you have some application that can read the whole file, understand the ADIF record format, and sort the data the way you want it; you are not going to get that. ADIF is a format for transferring log records from one application to another. Importing the ADIF file into a station logging application will allow you to search the records etc.. 73 Bill G4WJS. |
|
|
|
w1cu@...
Is there a way to open the wsjtx.log.adi with the most recent contacts at the top?
Jonathan w1cu@... |
|
|
|
Locked
Re: Failed to start Omni rig Com Server error
#Cat_RigControl
#Windows10
Karza <kari.sillanmaki@...>
Hi Greg,
You have set PTT method to RTS on port COM3. The same COM3 port is also used in OmniRig. Have you tried setting PTT method to CAT in WSJT-X? 73's de Kari, oh2gqc |
|
|
|
Locked
Re: PC Audio Output Level decreases during Transmission
#AudioIssues
#transmit
Jim Brown
On 9/11/2021 3:07 PM, Michael Black via groups.io wrote:
The final solution was changing his audio to the left channel only which ended up reducing the audio level to about 75% constant where it was reducing to 25% with both channels.Mike FYI in helping others to troubleshoot-- I've long used a Tascam US100 USB-connected audio interface from the world of pro audio. Nothing fancy, 48 kHz 16-bit max, bu in addition to having very good A/D, it has front panel gain controls for both I and O, and a green/red signal presence/clip lite. I use it for the two K3s that are on my operating desk for SO2R (single-op-two radios) contesting for CW, SSB, and RTTY on HF, and of course, for WSJT modes in the primary rig (right channel). Several times, Windoze updates have re-configured it as mono, which is a train wreck for WSJT-X. The fix is to reconfiged as stereo. My primary (non-contesting) rig is on the right channel, and it's the one that does WSJT-X. Although I'm a serious contester, I've yet to be bitten by the HF FT8/FT4 contesting bug, but I'm serious as a heart attack on 6M and 160M, and I do lots of SO2R HF RTTY contests very seriously. 73, Jim K9YC |
|
|
|
Locked
Re: Failed to start Omni rig Com Server error
#Cat_RigControl
#Windows10
On 13/09/2021 01:55, k2grg wrote:
Windows 10 ProHi Greg, have you tried following the advice in the WSJT-X User Guide FAQ section 6? https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.4.0.html#FAQ 73 Bill G4WJS. |
|
|
|
Locked
Failed to start Omni rig Com Server error
#Cat_RigControl
#Windows10
k2grg
Windows 10 Pro
OmniRig 1.19 WSJT-X 2.4.0 Rig is a   Yaesu FT-950, but using FTDX3000 profile in OmniRig (it works better than the FT-950 profile) Also on OmniRig: Log4OM, HDSDR both working well Thanks in advance for any help. Greg K2GRG |
|
|
|
Locked
Re: #FT8 #Windows10 #Icom
#FT8
#Windows10
#Icom
Tim Pillsbury
Success! - I swapped the USB port I was using for my wireless keyboard/mouse dongle with the one I was using for connecting my IC-7300. The Device Manager shows under Ports (COM & LPT) Silicon Labs - COM4 and under Sound, video, and game controllers - USB Audio CODEC. Now both FT8 and the keyboard/mouse work.
|
|
|