Date   

locked Re: WSJT-X 2.0 RC2 - Not "re-versioning"

Carl - WC4H
 

May I suggest that you post this to the wsjtgroup at yahoo groups (groups.yahoo.com) so that all the developers will see it for sure.

73.
Carl - WC4H


locked Re: Calling DX UP #FT8

Bo Barry <bobarr@...>
 

Good question! How do you tell if someone is doing fox hound? 
I check the DXpedition sites to see if a note is there.


locked Re: Calling DX UP #FT8

Tom Gregor
 

Good Morning OM:

"LID" is hamese for a poor operator. Definitely a derogatory term.


tnx es 73 de K3SSB
Tom G, Sr.


locked Re: Calling DX UP #FT8

Roger
 

All I can think of is that the person was being rude and meant "keep a lid on it" or "shut up".

On 05/10/18 17:26, Richard Kriss wrote:
This morning I noted the VK9TX was listening UP on 7.074 MHz. I had his Transmit offset (403 Hz) in my Rx and I put my TX in what looked like a clear spot (~ 1800 Hz) on the waterfall. When I saw him sending a RR73 to some station, I enabled my TX to called him. I let it call until I noticed he was working someone else. On his next RR73 I tried to call again
After a few tries, I noticed someone (no call sign) used free text to send "AA5VU LID".
I backed off not knowing what I did wrong? No joy on getting VK9TX
Richard AA5VU
WSTJ-X 2.0.0-rc2 under macOS 10.14 (Mojave)


locked Re: Calling DX UP #FT8

Richard Kriss <aa5vu@...>
 

Dave,

He was not running in the DX mode at the time.  He was on 7.074 MHz, exchanges with other stations were normal and current cluster spots were all standard mode.  

Richard AA5VU


locked Re: Calling DX UP #FT8

Dave Garber <ve3wej@...>
 

was he perhaps running in fox/hound mode, and you were not???


Dave Garber
VE3WEJ / VE3IE


On Fri, Oct 5, 2018 at 12:26 PM Richard Kriss <aa5vu@...> wrote:
This morning I noted the VK9TX was listening UP on 7.074 MHz.  I had his Transmit offset (403 Hz) in my Rx and I put my TX  in what looked like a clear spot (~ 1800 Hz) on the waterfall.  When I saw him sending a RR73 to some station, I enabled my TX to called him. I let it call until I noticed he was working someone else. On his next RR73 I tried to call again

After a few tries, I noticed someone (no call sign) used free text to send "AA5VU LID".

I backed off not knowing what I did wrong? No joy on getting VK9TX

Richard AA5VU
WSTJ-X 2.0.0-rc2 under macOS 10.14 (Mojave)



locked Calling DX UP #FT8

Richard Kriss <aa5vu@...>
 

This morning I noted the VK9TX was listening UP on 7.074 MHz. I had his Transmit offset (403 Hz) in my Rx and I put my TX in what looked like a clear spot (~ 1800 Hz) on the waterfall. When I saw him sending a RR73 to some station, I enabled my TX to called him. I let it call until I noticed he was working someone else. On his next RR73 I tried to call again

After a few tries, I noticed someone (no call sign) used free text to send "AA5VU LID".

I backed off not knowing what I did wrong? No joy on getting VK9TX

Richard AA5VU
WSTJ-X 2.0.0-rc2 under macOS 10.14 (Mojave)


James Quick
 

Is there any way to get the WSJT-X log to reflect my logging program? With WSJT-X now able to log direct to HRD it would be nice to have WSJT-X anr HRD Log the same. Thanks for any help or advice.

73

-- 
Jim Quick / N4ULE
n4ule@...


locked Re: WSJT-X 2.0 RC2 - Not "re-versioning"

Steve [VK3SIR]
 

Update: More information to follow from a compile that I just performed:

[100%] Built target wsjtx
Run CPack packaging tool...
CPack: Create package using NSIS
CPack: Install projects
CPack: - Run preinstall target for: wsjtx
CPack: - Install project: wsjtx
CPack: Create package
CPack: - package: C:/JTSDK-Tools/tmp/wsjtx-output/qt/5.9.5/2.0.0/Release/build/wsjtx-2.0.0-rc2-win32.exe generated.
Copying package to: C:\JTSDK-Tools\tmp\wsjtx-output\qt\5.9.5\2.0.0\Release\package
--------------------------------------------
 Win32 Installer Summary
--------------------------------------------
  Name ........: wsjtx-2.0.0-rc1-win32.exe
  Version .....: 2.0.0
  Type ........: Release
  Target ......: package
  Tool Chain ..: 5.9.5
  Clean .......: Yes
  Reconfigure .: Yes
  SRC .........: C:\JTSDK-Tools\tmp\wsjtx
  Build .......: C:\JTSDK-Tools\tmp\wsjtx-output\qt\5.9.5\2.0.0\Release\build
  Location ....: C:\JTSDK-Tools\tmp\wsjtx-output\qt\5.9.5\2.0.0\Release\package\wsjtx-2.0.0-rc1-win32.exe
  To Install the package, browse to Location and
  run as you normally do to install Windows applications.

(base) (QT-5.9) C:\JTSDK-Tools\tmp\wsjtx-output\qt\5.9.5\2.0.0\Release\build >

Note: C:/JTSDK-Tools/tmp/wsjtx-output/qt/5.9.5/2.0.0/Release/build/wsjtx-2.0.0-rc2-win32.exe is there … but so is C:/JTSDK-Tools/tmp/wsjtx-output/qt/5.9.5/2.0.0/Release/build/wsjtx-2.0.0-rc1-win32.exe from an earlier build … and this is what is being picked up !

73

Steve I



locked WSJT-X 2.0 RC2 - Not "re-versioning"

Steve [VK3SIR]
 

Hi Folks,

I am compiling WSJT-X 2.0 RC2 from source via JTSDK 3.0.1 (Windows) under Qt59 to a package ( jtbuild-cm package ).

The compiled code, installer etc. is reporting as RC1.

Can this please be looked at?

73

Steve I Vk3VM / VK3SIR


locked Re: #FTDX-3000

Frank
 

HI Jim,
check here for to find all config and info about FTdx3000d, free for using and download:

http://computerclub.no-ip.org/ftdx3000d

all config/app/info free available to copy on/for your FTdx3000d for to using full data in to USB and SSB-DATA or DATA, with full widht, on SSB-MODE.

73's
Franco, HB9oab
http://qrz.com/db/hb9oab


locked Re: #FTDX-3000

Eddy van Keulen
 

Hi Jim,

You need a virtual COM port (VCP) driver for the USB chip set in the FTDX3000. The manufacturer of the chip set is Silicon Labs (www.silabs.com). I found the following link: Yaesu USB Driver Update - MorseTutor.com
Hopefully this helps getting you started. 

Eddy, W6EDY



On Fri, Sep 14, 2018 at 15:11, James Quick
<n4ule@...> wrote:

Trying to set up my FTDX-3000 on a new Windows 10 Home computer. I would like to use the radios USB port for operation. I can't seem to get Windows to recognize the com port. If there is anyone that can help this 83 year old it would be a big help. Thank you for your help or advice.

73

-- 
Jim Quick / N4ULE
n4ule@...


locked Re: #FTDX-3000

Michael Black
 

Looks like you need to use the USB driver from Yaesu


And you need to set Menu Item 037 to RS-232

de Mike W9MDB




On Friday, September 14, 2018, 5:11:03 PM CDT, James Quick <n4ule@...> wrote:


Trying to set up my FTDX-3000 on a new Windows 10 Home computer. I would like to use the radios USB port for operation. I can't seem to get Windows to recognize the com port. If there is anyone that can help this 83 year old it would be a big help. Thank you for your help or advice.

73

-- 
Jim Quick / N4ULE
n4ule@...


locked #FTDX-3000

James Quick
 

Trying to set up my FTDX-3000 on a new Windows 10 Home computer. I would like to use the radios USB port for operation. I can't seem to get Windows to recognize the com port. If there is anyone that can help this 83 year old it would be a big help. Thank you for your help or advice.

73

-- 
Jim Quick / N4ULE
n4ule@...


locked Re: #RR73

James Quick
 

Thanks! Never saw that before. But when you are (83) there are a lot of things you don't see. HA HA. Thanks again for the help.

73

Jim Quick / N4ULE
n4ule@...
On 9/10/18 11:37 AM, Michael Black via Groups.Io wrote:

Hover your mouse over the TX 4 button and read the tooltip.

de Mike W9MDB




On Monday, September 10, 2018, 10:29:18 AM CDT, James Quick <n4ule@...> wrote:


Is there any place I can add RR73? I am running WSJT-X v1,9,1 r8747 on a Mac computer. Thanks for any help or advice.

73

-- 
Jim Quick / N4ULE
n4ule@...


locked Re: #RR73

Michael Black
 

Hover your mouse over the TX 4 button and read the tooltip.

de Mike W9MDB




On Monday, September 10, 2018, 10:29:18 AM CDT, James Quick <n4ule@...> wrote:


Is there any place I can add RR73? I am running WSJT-X v1,9,1 r8747 on a Mac computer. Thanks for any help or advice.

73

-- 
Jim Quick / N4ULE
n4ule@...


locked #RR73

James Quick
 

Is there any place I can add RR73? I am running WSJT-X v1,9,1 r8747 on a Mac computer. Thanks for any help or advice.

73

-- 
Jim Quick / N4ULE
n4ule@...


locked WSJTX Alert Issue #WSJTX_config

dvpoplewski
 

With the previous version of JT-Alert, when working a station (w6XXX). It would populate the operator name and location in the boxes at the bottom left. The current or latest version I down loaded will not ever populate those boxes even though I have DX Suites pathfinder running in the background.
Any ideas?

David KC8IV


locked Re: Time is #FT8

Michael Black
 

Short answer...yes
Long answer...yes it is.
Even longer answer....with WSJT-X you can just look at the dT values and adjust your clock to get < +/- 1 second times on the majority of decodes.  You can use TimeFudge on my QRZ page to adjust the clock in small amounts.

de Mike W9MDB

On Thursday, August 30, 2018, 9:09:56 AM CDT, Richard Kriss <aa5vu@...> wrote:


i wonder if theTime is URL https://time.is is close enough for compatibility with WSJ-X?


locked Time is #FT8

Richard Kriss <aa5vu@...>
 

i wonder if theTime is URL https://time.is is close enough for compatibility with WSJ-X?