1. main@WSJTX.groups.io
  2. Messages
   Date   
Locked Re: Alinco DX-SR8T, DX-Commander and WSJYX rig control

Bill Somerville
 

Hi Robert,

unless the rig has a USB-DATA mode yo should not be checking the "Settings->Radio->Mode->Data/PKT" option in WSJT-X. Try "Settings->Radio->Mode->USB".

73
Bill
G4WJS.

On 01/06/2020 20:07, robert gagnon wrote:

I have made a couple of contacts with


none selected


However here is when I select the dx commander


error

I have loaded the ALinco XML into dx-commander and from all of the DX labs software seems ok, and that same XML works with FL-DIGI




On 6/1/2020 1:47 PM, Bill Somerville wrote:
On 01/06/2020 17:43, robert gagnon wrote:
New to Forum.....
Have been using Winwarbler and DX-Commander for months with great success (DX-Commander needed my Alinco XML for proper rig control).   I am able to program the radio from DX commander or WinWarbler.

Enter a fellow HAM suggesting FT8 an WSJT-X.  He described the simplicity of using what I already have working.  I like that as sometimes these digital modes and the control are an issue. However in my case simple was not to be found.   I get a message within the WSJT on the cat test (button turns red) that DX commander issued an invalid command.

In interest of troubleshooting, I installed FLDIGI and added the rig control XML (same for it and DX-Commander) and FLDIGI works and offers rig control.

Since my radio is not a mainstream, I am concerned that WSJT will only be a manual mode program which unto itself has challenges.

Do the WSJT-X radio control files exist in a common folder?  Are they XML?   Is there anyone in the forum, using the Alinco with cat control successfully or am i blazing a trail.  A friend/Elmer and I went through his settings (he uses DX-Commander with his iCOM) and they still fail.   Another friend/Elmer using HRD provided his settings and again the failure.  I suspect it has something to do with the construction or call to the macro for my rig.

Help appreciated.

Hi Robert,

what is the exact error message you had when using DX Lab Suite Commander as a rig control intermediary? You can copy WSJT-X error messages to the Windows clipboard by hitting Ctrl+C while the message box has keyboard focus.

73
Bill
G4WJS.


Locked Re: WSJT-X with Kenwood TS-60 #FT8 #WSJTX_config

Ken White
 

The contact I made was only 41 miles away from my QTH in Tampa. I’m using 10 watts. 

On Mon, Jun 1, 2020 at 4:29 PM Tom Melvin <tom@...> wrote:
Great

Keep an eye on it  - 6m wide open last couple of days - expect at least another day of it looking at weather forecast . The other thing to try - tune to a local beacon (if you have one) you should see it on the waterfall.

Get a local to come on and check - it may just be you need to adjust the sliders.

If you made a CQ the audio getting in/out OK.

Keep trying - just watch the Stations in Florida - they seem to be very deaf - Yes spent about 2 hours trying to get two  this afternoon and failed :-(

Tom

--
73

Tom
GM8MJV (IO85)





On 1 Jun 2020, at 21:08, Ken White <khw210@...> wrote:

Hey Tom. It appears to be working! I responded to a CQ and made the contact. Interestingly, the Waterfall shows no activity.... Maybe because there's little/now activity on 6M these days...??

On Mon, Jun 1, 2020 at 4:45 AM Tom Melvin <tom@...> wrote:
Morning Ken

Ok on details - you should still be able to play FT8 without cat control.

First off, it looks like you have WSJT-X installed as you mentioned no TS60 as option - so set that pulldown to None.

If you have a signal link - if you have used it before on this mac then it should still be working. 

On WSJT-X settings set ptt to vox, on the audio tab set the in/out to be the USB sound device you are using with the Signal-link.

You do need to make sure the time is correct, Mac does have built in tools for this (so ignore comments like use D4, Meinlberg etc. etc they are Windows).    

WSJT-X works well under Mac, you should not need any additional software to make QSOs.

At this point as 99% of my experience is on the Windows platform I will let you digest and play with what you have. Come back to the group on the next issue - many many happy Mac users are here.

Tom

--
73

Tom
GM8MJV (IO85)





On 1 Jun 2020, at 01:10, Ken White <khw210@...> wrote:

On Sun, May 31, 2020 at 05:44 PM, Tom Melvin wrote:
Hi Tom. Thanks for responding. I do not have the IC10 computer i/face unit fitted. The TS-60 is a single band radio. I'd (think) I'd be perfectly happy with manual control. I have a Signalink USB and the proper cables for the radio. I believe my issue stems from the fact that I am trying to set this all up using a Macbook. There doesn't seem to be much amateur radio support for Apple. BTW. I don't think I mentioned - I'm trying to set this up so I can try FT8. Thanks again, Ken K4QGC





-- 
Sent From My MacBook Air


--
8 Plus
Locked Re: IC7610 transmits dual audio signals when on FT8 or FT4

Dave_G0WBX
 

Also disable/turn off, any speech processor in the TX path.

73.

Dave G0WBX.

--
Created on and sent from a Unix like PC running and using free and open source software:
Locked Re: WSJT-X with Kenwood TS-60 #FT8 #WSJTX_config

Tom Melvin
 

Great

Keep an eye on it  - 6m wide open last couple of days - expect at least another day of it looking at weather forecast . The other thing to try - tune to a local beacon (if you have one) you should see it on the waterfall.

Get a local to come on and check - it may just be you need to adjust the sliders.

If you made a CQ the audio getting in/out OK.

Keep trying - just watch the Stations in Florida - they seem to be very deaf - Yes spent about 2 hours trying to get two  this afternoon and failed :-(

Tom

--
73

Tom
GM8MJV (IO85)





On 1 Jun 2020, at 21:08, Ken White <khw210@...> wrote:

Hey Tom. It appears to be working! I responded to a CQ and made the contact. Interestingly, the Waterfall shows no activity.... Maybe because there's little/now activity on 6M these days...??

On Mon, Jun 1, 2020 at 4:45 AM Tom Melvin <tom@...> wrote:
Morning Ken

Ok on details - you should still be able to play FT8 without cat control.

First off, it looks like you have WSJT-X installed as you mentioned no TS60 as option - so set that pulldown to None.

If you have a signal link - if you have used it before on this mac then it should still be working. 

On WSJT-X settings set ptt to vox, on the audio tab set the in/out to be the USB sound device you are using with the Signal-link.

You do need to make sure the time is correct, Mac does have built in tools for this (so ignore comments like use D4, Meinlberg etc. etc they are Windows).    

WSJT-X works well under Mac, you should not need any additional software to make QSOs.

At this point as 99% of my experience is on the Windows platform I will let you digest and play with what you have. Come back to the group on the next issue - many many happy Mac users are here.

Tom

--
73

Tom
GM8MJV (IO85)





On 1 Jun 2020, at 01:10, Ken White <khw210@...> wrote:

On Sun, May 31, 2020 at 05:44 PM, Tom Melvin wrote:
Hi Tom. Thanks for responding. I do not have the IC10 computer i/face unit fitted. The TS-60 is a single band radio. I'd (think) I'd be perfectly happy with manual control. I have a Signalink USB and the proper cables for the radio. I believe my issue stems from the fact that I am trying to set this all up using a Macbook. There doesn't seem to be much amateur radio support for Apple. BTW. I don't think I mentioned - I'm trying to set this up so I can try FT8. Thanks again, Ken K4QGC





-- 
Sent From My MacBook Air
Locked Re: WSJT-X with Kenwood TS-60 #FT8 #WSJTX_config

Ken White
 

Hey Tom. It appears to be working! I responded to a CQ and made the contact. Interestingly, the Waterfall shows no activity.... Maybe because there's little/now activity on 6M these days...??


On Mon, Jun 1, 2020 at 4:45 AM Tom Melvin <tom@...> wrote:
Morning Ken

Ok on details - you should still be able to play FT8 without cat control.

First off, it looks like you have WSJT-X installed as you mentioned no TS60 as option - so set that pulldown to None.

If you have a signal link - if you have used it before on this mac then it should still be working. 

On WSJT-X settings set ptt to vox, on the audio tab set the in/out to be the USB sound device you are using with the Signal-link.

You do need to make sure the time is correct, Mac does have built in tools for this (so ignore comments like use D4, Meinlberg etc. etc they are Windows).    

WSJT-X works well under Mac, you should not need any additional software to make QSOs.

At this point as 99% of my experience is on the Windows platform I will let you digest and play with what you have. Come back to the group on the next issue - many many happy Mac users are here.

Tom

--
73

Tom
GM8MJV (IO85)





On 1 Jun 2020, at 01:10, Ken White <khw210@...> wrote:

On Sun, May 31, 2020 at 05:44 PM, Tom Melvin wrote:
Hi Tom. Thanks for responding. I do not have the IC10 computer i/face unit fitted. The TS-60 is a single band radio. I'd (think) I'd be perfectly happy with manual control. I have a Signalink USB and the proper cables for the radio. I believe my issue stems from the fact that I am trying to set this all up using a Macbook. There doesn't seem to be much amateur radio support for Apple. BTW. I don't think I mentioned - I'm trying to set this up so I can try FT8. Thanks again, Ken K4QGC





--
Sent From My MacBook Air
Locked Re: Faster decodes

Joe
 

Hi Jim,

Did you read the Release Notes?  Or the Section "New in Version 2.2.0" in the User Guide?

"FT8: Decoding is now spread over three intervals. The first starts 11.8 s into an Rx sequence and typically yields around 85% of the possible decodes, so you see most decodes much earlier than before. A second processing step starts at 13.5 s, and the final one at 14.7 s. Overall decoding yield on crowded bands is improved by 10% or more. Systems with receive latency greater than 0.2 s will see smaller improvements, but will still see many decodes earlier than before."

 -- 73, Joe, K1JT
Locked Re: Alinco DX-SR8T, DX-Commander and WSJYX rig control

robert gagnon
 

I have made a couple of contacts with


none selected


However here is when I select the dx commander


error

I have loaded the ALinco XML into dx-commander and from all of the DX labs software seems ok, and that same XML works with FL-DIGI




On 6/1/2020 1:47 PM, Bill Somerville wrote:

On 01/06/2020 17:43, robert gagnon wrote:
New to Forum.....
Have been using Winwarbler and DX-Commander for months with great success (DX-Commander needed my Alinco XML for proper rig control).   I am able to program the radio from DX commander or WinWarbler.

Enter a fellow HAM suggesting FT8 an WSJT-X.  He described the simplicity of using what I already have working.  I like that as sometimes these digital modes and the control are an issue. However in my case simple was not to be found.   I get a message within the WSJT on the cat test (button turns red) that DX commander issued an invalid command.

In interest of troubleshooting, I installed FLDIGI and added the rig control XML (same for it and DX-Commander) and FLDIGI works and offers rig control.

Since my radio is not a mainstream, I am concerned that WSJT will only be a manual mode program which unto itself has challenges.

Do the WSJT-X radio control files exist in a common folder?  Are they XML?   Is there anyone in the forum, using the Alinco with cat control successfully or am i blazing a trail.  A friend/Elmer and I went through his settings (he uses DX-Commander with his iCOM) and they still fail.   Another friend/Elmer using HRD provided his settings and again the failure.  I suspect it has something to do with the construction or call to the macro for my rig.

Help appreciated.

Hi Robert,

what is the exact error message you had when using DX Lab Suite Commander as a rig control intermediary? You can copy WSJT-X error messages to the Windows clipboard by hitting Ctrl+C while the message box has keyboard focus.

73
Bill
G4WJS. 



    

  


					


				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: hamlib NET rigctl
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Bill Somerville
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
On 01/06/2020 19:01, Allan Ewart wrote:
I cannot get rc 1 2 or 3 to work with hamlib NET rigctl selected. My logging program ( cqrlog ) boots first and evokes Hamlib, wsjtx boots when selected. It will turn the "test Cat" green for a second and then red with a error about not reading the vfo properly.
  This problem does not exist with version 2.1.2 . Linux ubuntu 18:04.4 rig is ic-7610 
Hi Allan,

a number of issues with Hamlib including with net rig control have been fixed for the next release.

73
Bill
G4WJS.

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: Mutltiple configs !, but multiple logs and qso-data ??
							

								
									
										
											#logging
										
									
								
							

								
									
										
											#WSJTX_config
										
									
								
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Bill Somerville
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
On 01/06/2020 18:04, Martin Blanz DL9SAD wrote:
Hello,

tahk you all for the fantastic WSJT-X programm. I use it with great fun !

But ...

I own my private call, a Club-Call and a special call. So I want to log in different files and also need different worked-B4 data.
Wouldn't it be nice, if WSJTX stores the relvant data in a seperate directory, dependant of the configuration used, or the log-directory could be changed in the config ?

73,
Martin DL9SAD 
Hi Martin,

configurations are not suitable for that use, you need to start WSJT-X with a `--rig-name=<something-unique>` command line option. That completely isolates the instances with separate settings, log files, and configurations.

As a bonus, if you have multiple rigs and audio interfaces, you can run multiple instances simultaneously.

73
Bill
G4WJS.

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: Alinco DX-SR8T, DX-Commander and WSJYX rig control
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Bill Somerville
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
On 01/06/2020 17:43, robert gagnon wrote:
New to Forum.....
Have been using Winwarbler and DX-Commander for months with great success (DX-Commander needed my Alinco XML for proper rig control).   I am able to program the radio from DX commander or WinWarbler.

Enter a fellow HAM suggesting FT8 an WSJT-X.  He described the simplicity of using what I already have working.  I like that as sometimes these digital modes and the control are an issue. However in my case simple was not to be found.   I get a message within the WSJT on the cat test (button turns red) that DX commander issued an invalid command.

In interest of troubleshooting, I installed FLDIGI and added the rig control XML (same for it and DX-Commander) and FLDIGI works and offers rig control.

Since my radio is not a mainstream, I am concerned that WSJT will only be a manual mode program which unto itself has challenges.

Do the WSJT-X radio control files exist in a common folder?  Are they XML?   Is there anyone in the forum, using the Alinco with cat control successfully or am i blazing a trail.  A friend/Elmer and I went through his settings (he uses DX-Commander with his iCOM) and they still fail.   Another friend/Elmer using HRD provided his settings and again the failure.  I suspect it has something to do with the construction or call to the macro for my rig.

Help appreciated. 
Hi Robert,

what is the exact error message you had when using DX Lab Suite Commander as a rig control intermediary? You can copy WSJT-X error messages to the Windows clipboard by hitting Ctrl+C while the message box has keyboard focus.

73
Bill
G4WJS.

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							hamlib NET rigctl
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Allan Ewart
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
I cannot get rc 1 2 or 3 to work with hamlib NET rigctl selected. My logging program ( cqrlog ) boots first and evokes Hamlib, wsjtx boots when selected. It will turn the "test Cat" green for a second and then red with a error about not reading the vfo properly.
  This problem does not exist with version 2.1.2 . Linux ubuntu 18:04.4 rig is ic-7610

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Mutltiple configs !, but multiple logs and qso-data ??
							

								
									
										
											#logging
										
									
								
							

								
									
										
											#WSJTX_config
										
									
								
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Martin Blanz DL9SAD
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
Hello,

tahk you all for the fantastic WSJT-X programm. I use it with great fun !

But ...

I own my private call, a Club-Call and a special call. So I want to log in different files and also need different worked-B4 data.
Wouldn't it be nice, if WSJTX stores the relvant data in a seperate directory, dependant of the configuration used, or the log-directory could be changed in the config ?

73,
Martin DL9SAD

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Alinco DX-SR8T, DX-Commander and WSJYX rig control
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    robert gagnon
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
New to Forum.....
Have been using Winwarbler and DX-Commander for months with great success (DX-Commander needed my Alinco XML for proper rig control).   I am able to program the radio from DX commander or WinWarbler.

Enter a fellow HAM suggesting FT8 an WSJT-X.  He described the simplicity of using what I already have working.  I like that as sometimes these digital modes and the control are an issue.    However in my case simple was not to be found.   I get a message within the WSJT on the cat test (button turns red) that DX commander issued an invalid command.

In interest of troubleshooting, I installed FLDIGI and added the rig control XML (same for it and DX-Commander) and FLDIGI works and offers rig control.

Since my radio is not a mainstream, I am concerned that WSJT will only be a manual mode program which unto itself has challenges.  

Do the WSJT-X radio control files exist in a common folder?  Are they XML?   Is there anyone in the forum, using the Alinco with cat control successfully or am i blazing a trail.  A friend/Elmer and I went through his settings (he uses DX-Commander with his iCOM) and they still fail.   Another friend/Elmer using HRD provided his settings and again the failure.  I suspect it has something to do with the construction or call to the macro for my rig.

Help appreciated.

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Hamlib NET rigctl
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Allan Ewart
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
  I am running Linux ubuntu 1804.4 and an ic-7610. None of the rc releases will work with hamlib NET rigctl . 
  Version 2.1.2 has no problem with it and can be re-installed with no problem. 
  I like the new version and running it with Icom 7610 selected works as long as I do not also have my logging  (Cqrlog) up at the same time addressing hamlib. 

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: Language Change rc3.
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Chuck Adams
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				





"Dial 1 for English"  (slouching toward Gommorah).










Sent from my T-Mobile 5G Device





				
					
					

					

						


From: main@WSJTX.groups.io <main@WSJTX.groups.io> on behalf of ea4ac.radio@... <ea4ac.radio@...>

Sent: Monday, June 1, 2020 12:48:55 PM

To: main@WSJTX.groups.io <main@WSJTX.groups.io>

Subject: Re: [WSJTX] Language Change rc3.

 






Hello, the argument "--language = en" does not work.


 


I have a Spanish Windows operating system and I want to switch to the English translation, but I am forced to use the Spanish translation due to my operating system.


 


Cedric


EA4AC






					


				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: Faster decodes
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Darl DEEDS
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				








I read the latest install notes in which they said that if the message is correctly interpreted it will post it early. So nothing is lost or needed. Its just an improvement. Keep making contacts.


 


Darl  NA8W


 





				
					
					

					

						
From: WA3ERQ

Sent: Monday, June 1, 2020 12:15

To: main@WSJTX.groups.io

Subject: [WSJTX] Faster decodes



 


I noticed that with the latest version, my decodes are popping up 1-2 seconds before the tones stop.   With this in mind, what data is transmitted during the last 2 seconds that appear to be not needed for a reliable decode?



Jim

WA3ERQ 


 





					


				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: Language Change rc3.
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Bill Somerville
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
On 01/06/2020 17:48, ea4ac.radio@... wrote:
Hello, the argument "--language = en" does not work.
I have a Spanish Windows operating system and I want to switch to the English translation, but I am forced to use the Spanish translation due to my operating system.
Cedric
EA4AC
Hi Cedric,

do not add spaces, it should be:

wsjtx --language=en

or

wsjtx -l en

If that does not work then there is a fix in for the next release. You can also change the primary language for your operating system if you prefer English.

73
Bill
G4WJS.

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: Language Change rc3.
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
		
			Cedric Puchalski
		
  

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
Hello, the argument "--language = en" does not work.


 


I have a Spanish Windows operating system and I want to switch to the English translation, but I am forced to use the Spanish translation due to my operating system.


 


Cedric


EA4AC

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: rc3 smooth installation and fine improvement
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    Jim and Hannelore Fisher
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
also noticed that if I wake up my computer post-rc3 it fires up the FTdx9000D--not an issue for me but I don't recall experiencing it before.

Jim VE1JF

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
			
				
	
		
	

		
			
			

			
			
				
				

					

						
							
							
								
									
										
											Locked
										
									
								
							

							Re: Language Change rc3.
							
						
					

				

				

			
			

				

					


						
							
								
	
		
			
		
		
  
	
    EA7HJ - Antonio
	

	

							
						
					

					

						
							


						
						 
						
							
							
						
						
					

				

			

			

			

				
Hi Bill
Thanks for your quick response. Agree.

73
Antonio
EA7HJ

				
				
				
			

			
			

				
	


		
	

		
			

				

				

				
					

						

							
							
						

					

				

			
			

				

					

				

			

			
				
		
		

		
		
	


	

			
		
	

	

		
		
		
		
		
	

	

		
		
		
		
		
	

	
	

		
		
		
		
	



	

		

			
	
		

			

				

					
						
							31941 - 31960 of 42884