Danny, try looking at https://help.ubuntu.com/community/AddingMimeTypes. There is a file /etc/mime.types which controls which file extension is recognised as which mime-type. You could

can you open the file in an editor? make sure the file has <eoh> and not <eh>. this may help wsjt find it... also make sure the filename end in .adi, and does not have any hidden extensions after

I suggest some relaxation in response timing requirements in Hamlib commands which are not time critical. All the commands dealing with setting up the radio and feeling out the capabilities do not

I just upgraded to 2.3.1 and everything works ok. The issue I'm having is the .adi file is showing as audio file. WSJTX will not read the file as I log contacts resulting in me making multiple

It is looking more and more like the same thing for me, Hank - I just took the plunge, downloaded the Win 10 latest version, and ran a 4 hour re-install. It didn't work. I realized after that what I

I gave up on this and have installed OpenNTPD everywhere, and it works very nicely. I have it on MacOs X, Linux, and an OpenBSD box or two. w8lvn -- --w8lvn--

This bug still exists in macOS Big Sur 11.3, released 26 April. 73, Steve W1SEG

Added to which 160 mtrs is for real QSOs ....proper conversations!😉

Might I point out that there is no assigned frequency for anything, in Amateur Radio. You could say there are recommended frequencies, however. Most of these "recommendations" are established by

I disabled the power settings by band on the system that is not used for bandhopping and it did indeed seem to cure the problem. I did not want to disable the power by band settings on the other

A couple of reasons ... the available spectrum for data modes is quite limited on 160 and the band tends to be quite noisy. SN requirements for FT4 are such that other modes - particularly FT8, JT9,

Hi all, I'm very interested in building the source code in Windows 10 environment, exist a guide or a sdk compliant ?A few months ago i'm able to build with older Qt versions now I can't. Let me know

And put the wire through the ferrite as many times you can or experiment. A single snap-on ferrite may not be effective at 20m band. If you can connect your rig ground and PC ground together with a

I just discovered ft4 and have been making many contacts when 20 and 40 meters ft8 is very busy. I also noted that there is no ft4 on 160 meters but I can't find a logical reason why that is so. Any

I do not have a ferrite ring on the USB cable. I will add one on. Thank you for your reply!

I have my color settings for 30/60m and they are the colors I like. Why when I change to 40 or 80 the color scheme is not the same?? -- Thanks 73's de NU4N/Dave

Just disabled "Remember power setting by band' for transmit and tune under the audio tab." No joy! Didn't work for me. Tks Al, 73 Paul W4ARK

Hi Joshua When FT8 works on one band (40m) and not on another band (20m), one possible reason is RFI (Radio Frequency Interference). Have you applied ferrites near all ends of all cables connecting to

Hello all! I have been having fun with the WSJT-X program! However, I have been having much trouble working 20m. When I press "Enable Tx" on 20m, it gives me this error: Hamlib error: IO

Thank you very much for weighing in Bill ! 73 Paul W4ARK