You just need to be transmitting above 1000 Hz in Fox/ Hound mode then the software will automatically take care of your QSO frequency excursions. Definitely normal... the program will move you to

I was trying to work A25RU on 80 meters FT8 this evening in F/H mode. I had my transmit freq set to about 2550 HZ. When A25RU called me my transmit freq would jump to his freq to respond. Is this

anyone know whats going on with wspr? ....no decode anymore? Sent from my Verizon, Samsung Galaxy smartphone

FT8 stopped opening, please help

I should have included CW and perhaps others as well.

I don't have this particular radio, but on numerous radios, unless you've modified it for "MARS/CAP" operation, 60M support is only provided out of the box for SSB Phone operation. It's a bit clumsy.

Hello everyone, I am working with a Mac (macOS High Sierra; Intel 4 Core I5; 16GB Ram + WJTX 2.3) I recently got the Yaesu FTdx-10 running on FT8 after a lot of messing around with settings both on

I live in Northern California, 30 miles NE of Sacramento. No matter what time of the day, I do not see any stations on the Band Activity side with 7 in their call sign on 17m. Any suggestions as to

Dear Group, I have an issue with selecting the required audio device. I have an Kenwood TS990 and an Icom IC-9100 connected by USB to my computer. (Running the latest update of Windows 10) In

A group of us have been trying out Q65 on 432 Mhz. We've been getting good results. Even with minimum tropo conditions in dry subzero air I've been able to work stations over 200 miles away using

On Sat, Mar 20, 2021 at 08:54 AM, Bill Somerville wrote: try clearing the Windows icon cache: Thanks for the help again, Bill. I tried the instructions on the link you posted, and I also found some

Hi Dave, try clearing the Windows icon cache: https://neosmart.net/wiki/clear-icons-cache/ 73 Bill G4WJS.

Done! Problem solved! That was the issue. Thank you very much for helping. 73, Bruno IU0OAD Da: <main@WSJTX.groups.io> per conto di Bill Somerville <g4wjs@...> Risposta:

Somehow I've managed to lose the WSJT-X icon that goes with the wsjtx.exe file for the RC3 installation. It's there for the other installations, such as 2.3.0 and RC1 and RC2 but not in RC3. It was

Hi Bruno, yes it is in the right place, but I assume you are trying to run WSJT-X v2.3.0 or later. The sysctl parameters have changed since v2.3.0. Please use the sysctl.conf

Hello Bill. Thank you for answering. I assume is in the correct place. This is the answer I’m getting back: Last login: Sat Mar 20 11:35:29 on ttys000 Restored session: Sab 20 Mar 2021

On 20/03/2021 14:44, Bruno Peticone via groups.io wrote: Hi Bruno, please double-check you are following the instructions correctly. You can verify you have the sysctl.conf

Hi. I know this has been discussed earlier but I keep getting this error message even after having followed all the instructions. This is what I get from the "sysctl -a | grep sysv.shm" command:

I had something similar happen around that time frame as well. After the PC screensaver would come on I found that after awakening, WSJT-X would key the radio but no sound would leave the PC. Just

Back in spring 2018 Rolf, DK7FU, contacted me about the key click from DB0HRF, on 2 m using PI4, that disturbed the DR9A contest group 172 km away. I made and installed a new S/W on the AD9912 driver