Big OOPS all round. SRI for getting all confused over this. The reason my beacon source would work and WSJTX properly decode all FST4 messages, but wouldn't decode FST4W ones was for a very simple

From what I’ve read, the missing tab was buggy and was not going to be fixed. So the easy way to get rid of the bug was to remove the tab. Apparently the dual purpose TX5 message serves the same

On 1296 MHz? Only if the antenna is in the shack pointed at the computer, or if shielding in the shack of the output of the power amp is broken (or if the amplifier's shielding is a train wreck). In

Like I said, folks who wouldn't know RFI if it built them you know where blame it for anything they don't understand. No, it does NOT sound like RFI. And RFI is one of my specialties. :) 73, Jim

I'm too tired to do the math right now but it would seem to me that it would take a very very long time to fill up a terabyte drive at 12-ish megabytes per month. That's gotta be 30 dB or more of

I just sent the file to George, hope he can figure it out cause I'm out of ideas.

Thanks Bill, I haven’t had any problems with hot switching but some with SPE amps seem to have a problem, resulting in blown LDMOS. I’m just trying to understand how it works. Appreciate the

Hi Gary, I also do lots of weak signal work on VHF and 160M, and I disagree with you, Gary. VHF/UHF is DIFFERENT from HF operation in many ways, including that conditions are often marginal and it

thanks so much guess it help to read the release notes. seen I was behind on updates. 73 Murf

I may not be an old timer at this, Bill, but he IS right. It has been used in this way on VHF MS operation since I got started in it almost 10 years ago when I retired. RRR waits for a 73 and the 73

I think the solution is easier than you think . It happens to me and I have spent a lot of time troubleshooting , but usually when I am not thinking strategically . Most of the issues you describe are

Where did you buy them ? Their website is not very informative. Tnx, Dick, W1KSZ

Thanks much guys, It finally hit me earlier -- the suggested working frequencies for 6m are not in rc3. So I did the needful. I tried 30A on 50275 kHz for a few hours but didn't work anyone, I did

Occasionally when running a CQ I get a green entry with my CQ call and U.S.A. appended to it that appears in my Rx window. My Standard Message for CQ does NOT include U.S.A. and I am wondering where

Yes it does sound like RFI, but it happens even if I reduce the power to zero. And I have ferrites on all my cables. Dave W7OJT

RFI on 1296MHz? Sounds rather unlikely unless you really are running GigaWatts Dave, in which case I'd be more worried about your exposure levels to microwave radiation........ I think Bill's

Close the program, delete the file. Are you running one of the 3.4.0-RC versions? I am and am seeing syslog entries, which I suspect is due to the fact its an open beta, and its a

I just bought two of these (strictly for radio work), and have too say, I am impressed for 250 bucks - YMMV M.2's and RAM non included Gigabyte GB-BSRE-1605B Quad Core / 8 thread CPU 4x HDMI 2x M.2

I would suggest that if the program is now working, and you don't have all those audio files in the SAVE directory, what the syslog says can be ignored. FWIW .. I just checked mine, and it

On 24/03/2021 21:09, Giga Watt wrote: Hi Dave, so i can see what is happening please put the attached file in your WSJT-X configuration files directory. On MS Windows the