Im suddenly not seeing anything on my waterfall. Never saw this happen before. Im seenig decodes on the band activty side and the RX side of windows appear normall. Can someone tell me what I need to

Version 2.3.0-rc1 When I am attempting to complete a QSO by resending a RR73 or 73, If a different station calls me while I have the Enable TX armed to send the RR73 or 73 it will switch to that

Does anyone know of a PPA with a built install package? All the ones I saw via a search were older, sometimes 2-3 years old.

I have observed what may be this same bug in WSPR and FST4(W) transmissions: The radio will go into transmit, but no audio will be produced. An important clue: If one has CWID enabled (I have it set

I reported this issue here earlier and was told that this is a bug in v2.2.2 and will be fixed in the next release. I have not checked if this has been fixed in v2.2.3rc. 73 de JH3SIF, Keith

Hi Chuck Yes it is persistent and as bill mentioned it is documented. This shortcut was added by a request made to alleviate or facilitate the switching from rrr to rr73 by blind hams as they could

I suspect the problem is caused by Win10 and its latest update. WSJT-Xv2.2.2 and Thetis v2.8.11 were working until the update. Now WSJT-X sees Thetis audio, but won't connect to the CAT system. CAT is

Your new PC is most likely set to allow the computer to turn off USB devices to save power. Check the Power Management tab of all your USB devices in Device Manager. Kyle K7KE

Hi Chuck, keyboard shortcuts are listed by the "Menu->Help->Keyboard Shortcuts" action. 73 Bill G4WJS.

Why would you need a button to duplicate ESC/F4? You just need to select the TX6 message before you call CQ, surely if you can't remember to do that you will also forget to click on the escape

Sam, Thanks for the great and timely tip! Is this option documented somewhere and I just missed it? Shame on me! Does that change to RRR or RR73 persist between sessions of use? My setup seems to

Hi David Use the shurt cut keys alt+r and Ctrl+R switch rrr an rr73 73 Sam W2JDB

Hello all. One change I would like to see implemented: Double-clicking on the circle for the Tx 4 message toggles between RRR and RR73. That is as expected. HOWEVER, it also makes Tx 4 the next

Hi Jim When calling CQ you are not calling or working anyone. Tx6 is active. All the other fields do not have any affect at all. They just contain who you either worked or attempted to work. 73 Sam

My 2cents, I agree. 90% of my time behind the PC, even when writing code is mouse driven, rarely touching the physical keyboard, even to the point where I often have an

Best reason I can come up with is: nice to be able to do the ESC or F4 function via a mouse click. 73 ... Jim K8CXM

Too often I call someone and they don't answer. I move frequency and go to call CQ and when I get no answers, i realize i haven't cleared the TX messages and i am still calling the other station. I

Hi Jim, F4 and ESC are not quite the same, ESC abandons the current QSO as well. Why do you need a button? I ask because simply double-clicking a decoded standard message will set up for a new QSO

Hello Bill, I know ESC and F4 does this function, but it would be nice to have a on screen button to do it. Not a big deal, but SEEMS simple enough to implement. Thanks! 73 ... Jim K8CXM

Hi Jim, ESC 73 Bill G4WJS.