https/hamspots.net -- you can sign up there and see signal reports and DT times -- looks like your time might be off a bit -- check http://time.is for a quick time

https://pskreporter.info/pskmap.html Just enter your call in the box and click go. Looks like you are being heard in many places on 20 meters. 73 Stan KM4HQE

Replying to oneself is iffy but I just sent a CQ and it shows transmit on my meter I am going to transmit now yup it is working now how do I get to PSK to see if I am going anywhere?? 20m Jim kd9dog

HI Bill, Yes, the FTol is 20; the frequency is less than 1 Hz off. I get the * when there's a problem - eg signal way off; but I've never seen the -91 level or -99 Signal/Noise before. And definitely

Hi Bill, I am using CAT control and the 200ms delay on both ends of the transmission is more than I would ever need. On 630 meters the software has to key IC-7610, a Monitor Sensors transverter, and

Is there a way to click on JT alert and engaged to contact.

Hi Richard, WSJT-X's main focus is weak signal working where repeats are often required and minimal information exchange is normal. Updating a signal report is an unnecessary

I have no idea what a sound card is but I do know my drivers are RealTek and when I go into Device Manager/network that under events RealTex says it has not been properly loaded would this cause a

Hi Rob, as Mike says, there should be no problem when returning to Rx, any delay is sufficient. Of course any form of VOX keying means all bets are off, including devices like the SignaLink USB that

Hi Bill. Thanks for the speedy reply. I understand your explanation, however i find it sort of strange, if one makes a SSB qso or a qso in any other mode and the signal inproves (or declines) then

200ms -- not adjustable Mike W9MDB On Sunday, August 1, 2021, 03:50:29 PM CDT, Rob Sherwood <rob@...> wrote:

Hi Mike, Thanks for your response. Do you know how long in milliseconds is audio OFF before PTT goes OFF? The 200ms default for the start of a transmission is certainly conservative and should

On 01/08/2021 21:25, Pa3gcu wrote: Hi Richard, you do not know if your QSO partner received your initial -24 SNR number, changing it may be confusing. More importantly the message

HI All. I noticed this on 30 meters a short while ago. 201230 Tx 705 ~ CQ DX PA3GCU JO11 201245 -24 0.5 904 ~ PA3GCU W3BTX FN00 201300 Tx 705 ~ W3BTX PA3GCU -24 201315 -18 0.5 904 ~ PA3GCU W3BTX

Hi Colin, is the signal whose frequency you are measuring within the FTol range you have set? 73 Bill G4WJS.

Hi Jim, In addition to those we may need all your rig menu settings and Windows audio related settings before a solution is found. If I remember correctly you are using Windows 10 and perhaps wsjt-x

Jim, you should see power out just by hitting the tune icon on WSJT-X. Your receiving so 1/2 of it works. Now you have to get the transmit (the other half)to work. Check D-USB if your radio can do

WSJT-X 2.5.0-rc4 on Win 10 x64. I successfully did a few runs of Frequency Calibration. Additional runs are giving me garbage like: 18:41:59 20000 1 1500 1499.976 -0.024 -91.0 -99.0

Bout time I'm a beta tester on the windows team and will download it and check it out. Scotty W7PSK On 7/31/2021 15:29, Michael Black via groups.io wrote:

Bout time Im a beta testor on the windows team and will download it and check it out. Scotty W7PSK On 7/31/2021 15:29, Michael Black via groups.io wrote: