I hear you on that. I wonder if folks intentionally don't go to the low end to save that for folks using the answer first function. Low freq goes first as I remember reading. Also, folks that use the

I managed to corrupt my wsjt_log file. Along with this, somehow lost the program settings. Managed to re-input the program settings and that is OK. To restore the wsjt_log I downloaded an adi from

Hi Mark, I am familiar with the 3 stage decode, but these are displaying after the new tx starts by 3-4 secs & causes tx msg to be incorrect - tx1 when s/b on to tx3, or tx3 s/b tx4... 73 - John -

Recent versions of WSJT-X decode in stages, see the documentation. Clearly received signals are decoded first, even before the end of the transmit window. Weaker or covered up signals are decoded

Sholto A lot of people on this forum seem to have a problem with delayed or dropped decodes. I think you are correct that the problem is latency, but I have tried everything to fix it and I can't

Jim, the issue outstanding with the Qt developers is related to progress bars, not with slider controls. https://wsjtx.groups.io/g/main/message/21289 73 Bill G4WJS.

I'm running RC4 with my logger on a second computer with no delays. 73 Roger G#4HZA

happy to keep it open on request. That one of the reasons for 24 hours notice. 73 Roger G#4HZA moderator.

(Name?) KB8JNE, I don't think it happens enough that it has been a big problem for the entire Ham community. Over time, it will naturally work itself out as we've seen happen with other popular

Noticed last night that I was getting very delayed reply decodes of the worked qso - while working a couple of QSO's. Like 3 or 4 seconds after tx cycle started! Did this on 3 qso's being worked -

Hi Bill, Yes, it is v2.3.0-rc4 on a Mac mini M1. I see that it is working for K6CRC, but he is on another processor. I also saw that you posted a comment about reporting this to the QT folks. So I

Hi Jacques, rather than disabling a feature you like, you can simply erase the "Band Activity" decodes window periodically before the issue occurs. 73 Bill

Thank you for your answer Reino. Yes, I do use "start new period decoded at top". Have been using this for a long time, kind of like seeing a new list of decodes every cycle.. I am removing this

A phenomenon I cannot understand. For some unknown raisons my screen “band activity” will become blank at random times. However, decodes continue to appear on the Waterfall and on the “RX

This is another misconception. If you are working split power does not matter. Low and high power stations are on pretty equal standing as most stations set call 1st and the guy with

Hmm…. Why should it matter what window he is watching? The only window that will make a difference in what he decodes is the waterfall and you don’t have to be watching it. I’ve experimented

In the middle of a QSO if I'm getting repeats I change freq to wherever I think is a clear spot. You can't really tell from your end. Calling station no luck, change freq. Bob -

A couple of times I was calling CQ this afternoon, and I had three stations reply - all displaying the same audio frequency as my CQ. All three decoded perfectly well. I don't think all three got

Hi Roger, why is this off-topic? 73 Bill G4WJS.

A phenomenonI cannot understand. For some unknown raisons my screen “band activity” willbecome blank at random times. However, decodes continue to appear on the Waterfalland on the “RX