Thanks, Mike. I am running Ubuntu Linux so there are no "Com Ports" as in Windows. The Linux OS calls them "Serial Port" and the /dev/ttyUSB1/ option does work since the receive data are properly

Gary, why are you using a SignaLink USB when the FTdx10 has built a built in sound card? I am sure the Yaesu FT8 preset assumes you are using the rig's PC interfaces as intended. 73 Bill G4WJS.

I'm curious of anyone has been able to implement total CAT control for WSJT-X on Mac Big Sur and would be willing to share their settings. I've got the Silicon Labs driver installed and can connect

Sounds like you are using the wrong COM port. The standard COM port controls PTT and with hardware flow control you will get the PTT asserted. You want the Enhanced port for CAT control. Let me know

Chris, Are you using the latest version of WSJT-X? I had problems with 2.4.0 with my Kenwood (TS-140S) after the upgrade but the current version works fine. 73 - Chip KD4C

My next question is has there been success with using individual virtual computers. With other applications in the past I ran head on into trouble with USB ports not playing nicely. Chuck

Hi Alan, In your case, may be the KISS solution is to buy another PC for video use? I assume that most hams are using just one WSJT-X program at a time. 73 fromTom, LA4LN Fra: Alan

Tom, Yes, simple. But doing one thing at a time reminds me of DOS days:-) I often have 6 or more instances of WSJT-X going along with browsing and all the other things. 73 Alan G4ZFQ

What works for me, when I want to watch a video, or participate in an on-line meeting, using my Windows-10 PC, I turn completely off the WSJT-X (clicking the «X» in the upper right corner) and

Alan Thank you for the quick response and tip on dealing with the inane behavior of the OS. Guess the solution will be like that for a network analyzer which uses USB for the computer as a display.

Chuck, There is in "Settings" "App Volume Device Preferences" but it only seems half effective. Make your on-board sound device default. Nothing else should be made default. You may have to check

Did you check the baud rate to be the same? Just a thought.

Hi Bo, do you have the "Settings->Radio->Mode->Data/Pkt" option checked? 73 Bill G4WJS.

One thing that is eluding me is the Windows 10 audio device setup and how to make a selection which does not change with each time the video viewer is used and then switching back to WSJT-X. This

Please note that this subject has been closed for reasons previously stated. Roger G#4HZA moderator

I have unusual behavior of Radio and WSJTX on startup. This comes after updating to WSJT-X 2.4.0 on Ubuntu Linux, even though I had many successful contacts before updating. Environment: Radio is

what happens if ptt in wsjt is changed to ptt via cat, so it would use com7, if I understand, to key the rig, not com5 sounds like rigblaster may be designed to work with vox, as well Dave

This is a classic example of “When all else fails, read the instructions”. Although I had read the tips, I managed to overlook the one that perfectly described my problem and how to correct it.

Thanks! I’ll take a look! Lynn WA4FKX

If you are interested in a challenge... you could look voor the Hermes Lite 2. It's an SDR trx with 5W output. Currently a batch is in production for delivery end