Hi Guys, I try to use a Virtual Serial Port for PTT in MAP65 but not work, I do know if a bug of 2.5.0 RC5 or or an impossibility, I hope this can be solved because I use everything with a remote

Hi Joe Tnx for the response. I have an ic-9700 with GPS stabilization so my frequency accuracy should be ok. I guess the other stations could be off frequency so I would see their ping but not decode.

On 15/08/2021 11:27, Amos Sobel 4X4MF wrote: Amos, this feature works and has done for many versions. You are not following the instructions correctly. You set the "Tx CQ NN"

Setting the split operation on MSK144 according to instructions. Setting the spinner control to say 100 and frequency to 144.360. Checking the box does create CQ 360 4X4MF KM72 and Rig Control Error.

>im using a wired mouse and keyboard.... but for whatever reason.... I came home from work and tried... I didnt have that same issue as of NOW.... >Thank you, for the response... BTW... I may have

After wrestling this combo for many hours, I still do not have it working. By the way, when I initially setup this rig, I did a detailed documentation of all the physical and software setup. With V2.4

im using a wired mouse and keyboard.... but for whatever reason.... I came home from work and tried... I didnt have that same issue as of NOW.... Thank you, for the response... BTW... I may have

I don't know if anybody else has had a similar problem but I was really scared this past week when I couldn't seem to copy anybody on 6m EME, even though I was getting great reception reports on the

HI. I do not wish to step on anyone's toes, however when i operate in my caravan using my lenovo laptop i have to use a cordless mouse and keyboard, otherwise i have the same sort of problems that Tom

Hi Peter, thanks for that. Unfortunately it doesn't help a great deal. So I can see what is happening please put the attached file in your WSJT-X configuration files directory

Hi Tom, that could be RFI causing unwanted mouse or trackpad responses. Does reducing power to minimum, using a dummy load, a different aerial, or a different band stop it

Does this help Bill? 73 Peter G3LTF

For some reason the program now sends commands when in the transmit mode to the computer and the result is the calculator starts and the wsjtx short cut menu pops up Any Ideas how to resolve? I

Quoting the late Richard Heyser, "trying to describe an audio system using only its amplitude vs frequency response is like trying to write Shakespeare with only one word in your vocabulary." A system

>That area is always blank even if I click on "Lookup." I did not see where to put my QRZ login information, or any other reference to lookups in any of the main or settings menus. Carl KB7AZ Hi

Thanks, that makes sense. I just didn't find the information in the places I looked. Maybe I just didn't look deep enough. 73 Bob, K4TAX

Hi Peter, you can put hashtags anywhere in the subject line. The serial port COM number should selected from the list of available ports, like COM2. Your settings sound OK with

Good afternoon, my first post to the group so not sure where to put the #tag. Problem.... Cannot get PTT settings to work properly with new win 10 PC In April I downloaded the then current version

That area is always blank even if I click on "Lookup." I did not see where to put my QRZ login information, or any other reference to lookups in any of the main or settings menus. Carl KB7AZ

Hi Buddy, 3 KHz may be a bit narrow if the edges are soft. Creating a reference spectrum and enabling reference spectrum compensation would probably also work if the 3 kHz