Hello Joe, I have it transmitting to the antenna now but have not received any response as of yet, I am not sure what I did but I was sent to a web site that helped me get the 991A set correctly and

The relative strengths of the two mixes shows up when you plot their data on the same graph. It leads to the same false interpretation of antenna vertical plots that results from normalizing them so

Ok, still new user here with a general question that I was asked and wasnt sure of the answer. The question was "if there is intent for the hardware to remain powered up 24x7 (or even remote

Calls are being highlighted in the band activity pane with different colors even though i have only selected colors for MY CALL and CQ. All others are deselected. ?? Hi jay, Do have JTAlert

Output from the rig is a balance between the PWR slider in WSJT-x The windows speaker volume And the digital gain (DT gain) on the FT-991a I normally set the DT Gain by

Hello Frank, Got the darn thing working it now shows on my watt meter 10 watts when it goes into transmit, Only thing now is to find out if it is actually send a message. I know there is wsper and PSK

Thanks everyone, JS8Call seems to be the solution for what I was looking for.

Calls are being highlighted in the band activity pane with different colors even though i have only selected colors for MY CALL and CQ. All others are deselected. ?? -- jay ny2ny

Why don't a couple of you try it and see? -- 73, de W8AF ~ Anthony

In my application, I am working 2M meteor scatter. I find that power and antenna gain are both needed. I just happen to have a solid-state Class C commercial amplifier capable of about 500 watts

On Wed, Jul 28, 2021 at 09:24 AM, Gregg wrote: for windows seems like the drivers give the option to do everything with one cable (which is what i was trying) but that might be my issue The Pi is

You could also try using a VPN, you will have a different ip address. 73, Bob KM4RL

Agree, try JS8CALL. And take a look at this YouTube channel: https://www.youtube.com/c/oh8stn Julian shows JS8CALL in action. Unfortunately, I haven't had time to get into it myself. 73 de

Jim The specifications I see for FairRite 31 is that it loses its effectiveness above about 10MHz. I don't understand how you justify only using 31 above this frequency? 73 Roger G#4HZA

Hi, I quiet often use the "TX Next" option to force a TX while a plane is in a good spot. Sometimes the next block has a TX by the auto TX algorithm. Is it possible to have the auto TX algorithm

Hi, I've noticed my remote site doesn't transmit as often as I would expect. I don't see this issue with my QTH setup - W10 IC9700 V2.4.0 TX PCT 20% Any suggestions on how to troubleshoot? Remote

Just an idea as an "option" somewhere, as I know not everyone will want this: When changing bands, clear the spectrum display. Yes, I know I can do that by clicking the "controls" box, but then that

It is always a bad idea to accept statements with no trustworthy attribution. 73, Jim K9YC

Google with no author what is best toroid core mix for hf

I wrote that 14 years ago. I've learned a lot since then, and the tutorial that included it has been updated at least a half dozen times to reflect that. Always get my writing directly from MY