... got the A.I. :) , I will do it in the next days ... ciao -- 73 paolo IU2OMT

Sorry 17m! Sent from Mail for Windows

I just added the mcHF to hamlib as model#1045 and M0NKA as the manufacturer....but maybe that should be "OpenSource" as the manufacturer to have something for additional rigs in the future. 1045

FT847UNI should be reading back the last frequency set (it has to assume it doesn't change). If it's not then I need to see some debug. The FT817 backend is written for a real FT817 -- not an

On 03/11/2021 16:16, Andy TALBOT wrote: Hi Andy, also I think the warning is simply to remind users that a CAT "POWER OFF" command is not really powering off the rig since there

Oh dear, red face, I must be getting too old for this sort of thing Yes, you're quite right, command 03 is just a straightforward one; send and wait for response Andy www.g4jnt.com

Hi Phil, I can't offer anything with respect to the coupling between changing settings and resetting the CAT connection, at this time, but in FT8 DXpedition Mode the ENTER key is a shortcut to enable

This afternoon I was on 12m, and on the IC-7300 spectrum scope I could see FT8 activity 5kHz down. Tuned down to see what it was and it was the HD8R DXPedition. Thought I would join the throng so went

On Wed, Nov 3, 2021 at 05:06 PM, <groups@...> wrote: Many qrz.com entries for those using WSJTX are out of date or just wrong, sometimes deliberately for privacy reasons. Me? I don't change qrz.com

Hi Mike, Andy some notes / clarifications My Rig is mcHF-QRP (http://www.m0nka.co.uk/) an open HW device, running UHSDR sw (https://github.com/df8oe/UHSDR). Its CAT interface is emulating

Many qrz.com entries for those using WSJTX are out of date or just wrong, sometimes deliberately for privacy reasons. Me? I don't change qrz.com when I'm not operating from home. I am totally

Pietro https://www.qsl.net/dl4yhf/rsNTP/rsNTP.htm I have used this on Windows 10. I have not used as a default timekeeper so I do not know how it performs in the long term. 73 Alan G4ZFQ

You may be misreading the manual. It's the Power On/Off that talks about the battery pack. Mike W9MDB On

Look for TimeFudge on my QRZ page. I have a Windows executable and source code for Linux/Unix. Mike W9MDB On

I think the only way is to stop sync and adjust your clock manually. But if there exists a sync software with this capability I'm interested, too! Pietro I2OIM

Is it possible to adjust my time to match an off-time DX station? [Right now, 7P8RU's clock is running about 1.2 sec fast.] 73 - Rich, K1DJ

This is okay if it's an option, which is what Ellis suggested. Otherwise, one should be allowed to transmit anywhere your governmental rules allow. The existing bands have no official status. And

On Wed, Nov 3, 2021 at 03:53 PM, Reino Talarmo wrote: If GM1BAN sends 4 character locator, how the receiving entity can provide 6 character locator to the spot

Reading this thread piqued my intrigue, so went and had a look at the manual for my FT817ND. The CAT command for getting frequency is there, but has the feeling of having been added as an