Open the Windows SETTINGS app, then select Privacy. Its located there. Neil, KN3ILZ

Tell me about contest, haven’t seen info. Where can I find the particulars? Tnx

Both my audio in and out are set within Windows to my default audio devices for windows which are both Realtek. Grady KF5KZX

Hi again Bill, Screenshot of "Settings>General>Monitor returns to last used frequency as set up for all these tests. https://www.dropbox.com/s/qjtluuo7y9hn8pk/Settings%20General.jpg?dl=0 Cheers -

I'm going to upload some dropbox images to show what is happening, This is in V2.3.0. OK, so I set up two configurations. The 1st was JT65b on 50.310MHz saved and named "JT65" the second was FT 8 on

Hi Dave, the frequency you get when you switch to a configuration depends on the "Settings->General->Monitor returns to last used frequency", if it is checked then the last used

I've already done that, too many times changing something resets the rig/audio settings and I have to re-enter them. They are saved to a folder that I can find easily as well... Dave (G0DJA)

Hi Bill, In my last trial I was only using V2.3.0 and I was trying to set up two configurations for existing modes, FT8 and FT4. I set up the two clones, each having, as I thought, the frquencies of

Just checked and, no, it's unticked. Cheers - Dave (G0DJA)

I seem to be unable to find anything that references camera and microphone privacy settings. Grady KF5KZX

Reino, That's good info to know. You are always very helpful. 73, Bob K8BL

I"m not sure they intend Call 1st to be used in Q65, but you are right, it is inoperative and Autoseq doesn't always take off as expected every time. The dev team is aware of both 73, N0AN Hasan

Hi Grady, have you allowed WSJT-X access to microphone devices in "Camera & microphone privacy" settings? 73 Bill G4WJS.

Hi Ken, the file wsjtx_log.adi in the WSJT-X log files directory is used to determine worked before information. It is read at startup, when switching configurations, or when the

What are you using for a sound connection? If you're getting output on the laptop speakers, then you don't have the WSJT-X settings set correctly. Neil, KN3ILZ

Just put QRP between the CQ and the callsign in the Tx6 message. Neil, KN3ILZ

It is a beta .. and as such if you're using it, you are asked to report these things to the WSJT-X Dev list. From the WSJT-X page:| "Candidate releases are intended

Hi Neil, and David, it's not that simple. The working frequencies tables for every configuration have to be read into memory at application start up, that can only work if all the modes used are

Thanks for the info. This will give me a troubleshooting path. Bill S: you are amazing and patient! Dan G: thanks for the setup setting save tips. Rob Freedman 720.226.7708 “The free market

OK .. something's wrong there ... there should not be changes made in the other configuration's frequency lists. This may be a drastic move, but take screen shots of all your rig