The big problem I have is that the audio codex for both is identical, so with both connected there is no way to differentiate except by trial and error. Wish there was a way to give them different

This may be a stupid question, but I can't find the answer in the User Manual. Does WSJT-X calculate the DXCC it displays in the decoded messages from the DXCC prefix, or the grid square? I am going

I'm probably going to catch some critism for this, but the 7300 is one of the rigs where you should run ALC. The meter on my 7300 reads about 3/4 of full ALC scale....note that the ALC full scale is

Yes, far better choices. Fair-Rite #31 is the weapon of choice from 160M to 2M. Study my tutorial on killing RX noise to boost contest scores. k9yc.com/publish.htm 73, Jim K8YC

Thanks for your comments, Reino. As in previous NRAU NAC contests the "File - Settings - Advanced" setting is set for "Special operating activity" and "EU VHF Contest". The contest stations were using

25 to 300 KHz is a bit low for the ham bands. 73 -- Larry -- W1DYJ

https://www.tdk-electronics.tdk.com/download/528858/f166f3fdc24325c6b592a75777608210/pdf-n72.pdf Says #72 ferrite is good for 25 to 300 KHz, so there may be a better choice. 🤷‍♂️ 73, Willie

Hi Nick, I know it seems unlikely, but did you change bands between those two decodes of PY2IQ? 73 Bill G4WJS.

What's the source of this advice? Who makes a #72 material? It's not Fair-Rite. Can you point us to a technical data sheet for it? Before resorting to ferrites on cables, the station should include

Lack of logging happened to me also at last Thursday's monthly NRAU NAC (Nordic Activity Contest) with FT8 on 50 MHz, when the WSJT-X 2.4.0 RC4 refused to log the contacts in any way on my Windows-10

wsjtx-2.3.0 GA release, Qt5.13.0 Linux Mint 19.3 Tricia - Cinnamon Linux LM19-3 4.15.0-140-generic #144-Ubuntu SMP Fri Mar 19 14:12:35 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux The colours displayed in

Hi, Are you saying that you hear audio from rig’s speaker? At least then your audio connection to U5 and further to PC is not working. You need to get that working before there is no need to worry

ic 7300

Good morning, I am presently running wajtx woth dxlabs suit for my ic7300. I have a new 9700 I want to use. I have read up some and watched a few videos, but wondering if anyone has a set up like this

You may think your antenna length is random, but 34 feet per side makes it almost a full-wave dipole on the 20M band, therefore it has a VERY high impedance at its feedpoint, certainly NOT 50 ohms,

Dears, I discovered incidentally that the issue is due to the call3.txt file. Which makes sense, since that as far as I know, only JT65 makes use of the call3.txt file (EME). When installing

Lack of logging happened to me also at last Thursday's monthly NRAU NAC (Nordic Activity Contest) with FT8 on 50 MHz, when the WSJT-X 2.4.0 RC4 refused to log the contacts in any way on my Windows-10

I tried the set up recommended and I've checked my clock. I'm using Meinberg NTP. Clock is synced. The audio is still coming from the rig. Still no waterfall. Should I be able to codify/change the

Hi, You may get some answers to your questions, if you follow instructions in pinned mail "Setting Windows WSJT-X Tx audio levels (ALL VERSION 2 VERSIONS)", #13890. In short power slider changes

What kind of XMTR do you have? Fred WB4QOC Sent from my phone.....Fred