My stn is showing on 40 but not the antenna I have set in the freq. tab It's just showing my location and LOTW sign on psk reporter. Any thoughts wud be appreciated. -- Thanks 73's de NU4N/Dave

Have you tried running at a lower RF output power to see if it does the same thing? Or run full power with a dummy load attached. That way you could make sure it's not related to stray RF coming

v2.3.1 (GA) Dark Mode anomaly When STD messages are populated with a callsign (from Dx Call window) and you switch modes from FT8 to MSK144, the Tx5 field generated changes to light blue with white

Hi everybody, I am now QRV on MS-50.280 for at least 2 Months, I am well in working normal QSO. Now, in a few days; the Lyrides meteor shower is voming up. Please tell how to operate this issue and

I have. And it frequently locks up (spinning beachball) when I try. What has worked is the following sequence: 1. quit WSJT-X 2. change radios in logging software (MacLoggerDX) 3. launch WSJT-X 4.

OM, so I can see what is happening put the attached file into your WSJT-X configuration files directory (~/.config/), restart WSJT-X, do the minimum steps to reproduce the issue, then

Hi Marek, what do the following commands print? pactl list short sourcespactl list short sinks 73 Bill G4WJS.

I entered and submitted my log. I received no acknowledgement. I could find no results from past contests on the web site. There is a link to archives but the only material I found there was

Palomar Engineering is hardly an authority on this. They are a MERCHANT. 73, Jim K9YC

Sorry for the simple typo that seems to have upset the entire rather vocal ham community. I meant to type '73' instead of '72', but then I missed reading table note 7 regarding the non-availability

Thanks, Geza. Yes, I think the contest is fake and the web site is a promotional site for MSHV and WSJT-Z. Z for Zombie contest.. I do like the "contest " for low pressure practice. FT contesting

DAVE - Previous postings to initiate this thread were made in November 2018, and reflect the current WSJT-X version at that time. It helps to read back to the beginning of the thread before

No results found from neither form last year, nor from this year. It seems to be a fake contest organized by a fake-club. No answer on e-mail requests, no responsible contest manager, no list of

I am running WSJT-X on a Raspberry Pi 400. This error occurs on both 2.3.1 and 2.40.-rc4 versions with Hamlib 4.1 installed. I am using a USB data cable with a ferrite and about 5 turns through it and

Hi all, I am facing exactly the same issue as Ted Wood does. I have Xubuntu 20.04.2 LTS. Originally I had WSJT-X 2.0.2 from the repository, then I switched to WSJT-X 2.3.1. My WSJT-X audio devices are

Do you mean by input DC power to your final amplifier or RF input to an external power amplifier? Well, that recommendation is two-folded, with a typical 100 W rig 30-35 W is (really) safe output

By the way have you tried Configurations? Those should work without any need for quitting or restarting. 73, Reino OH3mA Lähettäjä: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] Puolesta

I tried PSK reporter this morning and the counter is not showing reports. I am on 40 FT8 and the antenna shows on reporter a 30/60 OFCD. I have my antenna for Hustler vertical/40-80 vee. I even

Hi Rich, To me, it sounds like you may not be transmitting. I would start by calling CQ a few times and then checking https://pskreporter.info/pskmap.html for your callsign. If no one is hearing

Since around 1970, FCC Rules have been for output. WSJT-X modes are WEAK SIGNAL modes, not necessarily low power modes. On the HF bands, yes, most of us run 25-40W. It's also good to run no more than