Paul, No, that is not possible in the current version of WSJT-X. ( Unless - of course - you modify the program source and recompile.) 73's de Kari, oh2gqc

Surely you should log whatever was sent over the air at the time of the QSO?? One would hope that the other station knows where he is transmitting from and is transmitting the correct locator at the

I am installing WSJT-X 2.5.4 on a UBUNTU 20.04 system. I installed with the binary and immediately found the soundcard and am receiving and decoding signals just fine. I am struggling with the CAT/PTT

Thanks Bob. Does your computer connect directly to the Internet or through a Router? Thanks, Ron - KJ5XX wrote:

Kari, My CAT does work properly. I can get the radio to connect at 19200 baud via COM-3. That wasn't checked. The only thing that is, is "Tx messages to Rx frequency window". Josh

Ron, it may need to have what ntp servers it's looking for changed. When it comes to ntp, using a programs default is not always the best choice. I did use nettime for awhile, but changed to

Unless I missed it, you haven’t established that your time is not properly synced. Can you receive anything if you park the receiver on a busy FT8 frequency like 14.074 or 7.074 UPPER sideband? Do

Hi Josh, * Is your Cat working properly? * Check if you have "Start new period decodes at top" selected in Menu => Settings => General. If so, uncheck it. 'Kari

Josh - AF1UD 1. Computer time is correct. 2. I put rig on USB mode. I followed https://wb4son.com/wpblog/?p=2390. Photo of WSJT-X

Hi [Name?] [Call?] 1) Make sure your computer time is correct. ( check with https://time.is ) 2) Check that your rig is on USB mode If those 2 do not help, please give us more details of your

Most hams confuse grounding with bonding. A connection to mother earth is CRITICAL for LIGHTNING PROTECTION. It has NOTHING to do hum, buzz, or RFI. Bonding, defined as tying together every chassis

Hello Ron, here is my experience with Meinberg: I installed it years ago, there was no setup and I haven't even thought about it since. It works perfect. 73, Bob, W7BA

Have to admit I missed this feature in FT8 (though use it often for MSK) and was also surprised to find my transmitter had been moved when I clicked on a CQ call on Wednesday. In my case it was

Hi, I think this is specific to FT8 with regard to free text faciltiy but could be wrong, and apologies if this has been addressed before (did a search). OK, I have been using the free text box 13

Hey all, I've been using WSJT-X for a couple of months, making a lot of FT8 contacts on 20 &17m during the day. This question is not about WSJT-X per SE, but I thought that a lot on this group might

Hello, I had one good receive sessions with wsjt-x but ever since then it hasn't been working. I can hear the digital traffic but it doesn't want to decode it (nothing pops up on the readout). I have

Hi there, I see on my main window "Az: nnn" and "nnn mi". Is there a way to have the distance recorded in the log? Perhaps in Comments? Thanks. 73, Paul K1ABC

I am always amused at the "extensive" grounding systems applied at some stations. I do not use a station ground! Yes, I have lightning protection devices on all feedlines and rotor cables, but

Greetings guys, I had the same issue with win10 and WSJTx. A reply came here on groups.io but I didn't bookmark it. There is an audio issue in win. This is from memory - go to settings, audio,

Hi Sam, What I tend to do now is look at the Locator in WSJT-X before I delete it and then save the QSO to HRD making sure that the 1st four characters match. If they don't then I adjust accordingly.