And where is your copper pipe grounded? Mike W9MDB

I do indeed. All equipment and the sheet metal it is sitting on is bonded to a copper pipe running along the back of the sheet metal. Thanks,Mike, AE8USent from my T-Mobile 5G Device

Done. Why didn't I think of that? I downloaded and installed the 2.5.3 version at the start of January. Thanks for the information. 73 de K1VK Paul

Ian, this extract from some notes I prepared a while ago for my FT-817ND (of which the FT-818 is a clone with more recent componentry) may prove helpful: 73, HTH, Stay Safe, Robin, G8DQX If that

Hi Sam, Good point, I will ask HRD to consider populating the 2 missing characters if the first 4 match WSJT-X. All understood being aware of recording the wrong grid, that has happened to me so I

Hi David, There were cases where the locator from QRZ.COM did not match the correspondent's actual locator. Therefore, the automatic replacement of the locator should be approached with

Do you have every piece of equipment in your station configuration bonded to a common point? I use the power supply ground terminal for my station common point. As others have found, a star ground

Dear friends, Why does MAP65 offset frequency in the Wide Graph? The Offset spin box doesn't help. Thank you- W9IP

Hi Mike, FST4W-120 is about 1.4 dB more sensitive than WSPR. I was part of the alpha test team for FST4 and FST4W. Extensive comparisons on 2200 meters under real world conditions showed that FST4W

Mike, That is a good question and I will definitely check (Elvis has left the building for today). :-)I was thinking I had seen a reference to that and had checked, but if I did I only checked the

Have you turned off USB suspend in the USB device settings?On your USB hub too? Mike W9MDB

Good afternoon everyone. I am getting random errors in WSJT-x. A dialog box pops up that states: Error in Sound Input. An error occurred during read from the audio input device. Now before you

Hi David, Just be aware that by doing that you may be recording the wrong grid. You may want to contact HRD and ask them to enhance their program by add the 2 characters to the first 4 only if the

Hi Jim It was a sked, having exchanged exact settings including screenshots of settings, etc. Good that you managed to get a FST4 sked to work, and also with a VK! I tried with a VK and it failed. A

Are you trying a sked with a specific station, or just calling CQ? I haven't looked this season, but last season there was almost no random FST4 activity on 160M. Likewise for FST4W. I tried a FST4

Hi Paul, Upgrade to v 2.5.4. 73's de Kari, oh2gqc

Is there a way of configuring WSJT-X FT8 so that it sends (a) 6 character Grid Locator (AAnnaa) if available or (b) a blank Grid Locator? I currently delete the 'DX Grid' before saving a QSO that is

* Not sure if this is the right forum, but here goes! * I've been trying to make a QSO over a difficult path on 160m: G to ZL, and have tried FST4 a number of times. I wonder if I am doing something

Wsjt-x has random crashes. Currently running WIN10 on an i5 computer. Rig is Yaesu FTdx5000 with HRD as the interface. The crashes started when I upgraded to ver. 2.5.3 69fec. When I try to

I have an FT818ND and can receive perfectly ok but no matter what I do I cannot get any Audio from the Computer through the SCU-17 to the Radio. I have been to the Supplier of the set and they have