Thanks for the suggestion Willie. Both the transmit and receive audio are conveyed to and from the 7610 via the SignaLink using the USB CODECs and the rear-panel connector (not the front-panel

PSKreporter has the data… especially if you enable it in wsjt to contribute your data. But to see the data, it I use one site called dxmaps. It has the option of turning on or off spots from

Andrea, The corresponding section of the cty.dat file: Italy: 15: 28: EU: 42.82: -12.58: -1.0: I:

No thunderstorms/lightning for several months (summer). The connections all seem good- weird thing is I fired everything up this morning and it's working like a charm now (knock wood). However,

Bottom right corner watch the "WS:NN" message.  Tells you how much time is left on the watch dog. Then File/Settings/General bottom right is the "Tx watchdog" value. Mike W9MDB

I just recently put wsjt on a new laptop. It’s working just fine except it will only allow me to send CQ 5 times then it stops. How can I increase this? I have dug through all menu options and have

Not sure about 2.5.2, but there were issues with some versions in the past. The issues I saw were about having he tune box ticked in the schedule, if you don’t need to tx a small “tuning”

Hiroki- Not sure about 2.5.2, but there were issues with some versions in the past. Dan KC2STA

So I have a new call sign and I assume you change it in settings...currently my old call automatically pops up a log which once accepted it automatically logs to HRD and QRZ...do I have to make any

Double check your serial connection. Unplug and replug Possibilities #1 Connectors loose #2 Cable failed #3 Rig serial port failed #4 USB bus on PC failed #1 is easy to check #2 (and #4) test by

All of a sudden, tonight, I'm getting this hamlib error: Hamlib error: IO error kenwood_open: cannot get identification kenwood.c(885):kenwood_open return(-6) rig.c(1031):rig_open return(-6) while

Hi Pete, Not the same format, but PSKReporter is almost universally fed by users of WSJT-X and modified versions of the team's code. I find it extremely useful in studying propagation and

Thank you Neil...I was a little unsure of which flag had to be set Save this as hamlib_settings.json in the same location as WSJT-X.ini {     "config": {     "auto_power_on":

FWIW ... there were so many complaints about that inadvertent HAMLIB 'feature'  (note nothing to do with WSJT-X at all) that it was turned off and is now a user-settable feature. A search using the

Save this as hamlib_settings.json and place it in the same location as WSJT-X.ini I think it should work. {      "config": {              "powerstat" : 1      } } Mike W9MDB

In earlier versions on WSJT-X, the radio was powered up when the program started. I believe in Version 2.3 or later, this feature was removed. Could we have the feature back, but add a 'button' in

This actually makes a bit of sense, if you are listening to the radio audio, and the input is switched from the radio to a microphone in the room, then the computer will still see FT8 audio, but

Have you turned off all the energy saving stuff on the USB devices? Prevent them from going to sleep? Mike W9MDB

What version? Are you able to compile things yourself? 2.5.4 should be out pretty soon which should fix a lot of the hamlib bugs reported. Mike W9MDB

Random sensitivity decrease... I am using WSJT-X, version 2.5.3 on an HP Spectre laptop computer running Windows 10 with a SignaLink USB interface to an Icom IC-7610 transceiver, and have had