On 01/11/2021 18:00, Stefan U. Hegner wrote: <snip> Hi Stefan, Hamlib is statically linked into WSJT-X in our pre-built Linux packages, so you must re-build WSJT-X to

Hi there, I got the following setup (Ubuntu 20.04 LTS): Net-Rigctld (using 1 serial port for CAT control - /dev/ttyUSB1) Second serial port for PTT control (/dev/ttyUSB0) WSJT-X Homebrew

Hi Jim, my apologies, I misinformed you. Thanks to Charlie, G3WDG, for pointing out my mistake and also resolving the non-decode. Firstly, the decode was never a result of message averaging as you

Bill, Thanks for your quick response... His immediately previous transmission was calling N2END with his grid. which was decoded... so the averaging should have been cleared, right? This was his first

On 01/11/2021 17:25, Jim Moss wrote: Jim, I removed the attachment from your post to save space since it really doesn't help with your query. It seems you do not understand

Today while monitoring 1296 EME on Q65-60C using v2.5.1 decode = deep enabled averaging autoclear average after decode saving all wav files maxdrift 0 I decoded live: xxxx -23 2.6 1167 : N2END KB2SA

On 01/11/2021 14:30, Roland wrote: Hi Roland, there's no timeout, the WSPR decoder takes as long as it needs. It is up to you to ensure the decoding parameters are such that

On 01/11/2021 16:42, bownes wrote: OM, can you confirm if scrolling down the Band Activity decodes window reveals the missing decode please? 73 Bill G4WJS.

I am currently testing the all-new RPi 2 W. I am curious to see if the 15$ SOC can handle decodes on busy bands, with lots of WSPR signals to decode. Now my question is does WSJT log if a decode

System: MacOS 11.6 (Big Sur) WSJT-X: v2.5.1 f30d2c Problem Description: After a period of time (~30-40 minutes) of otherwise unattended monitoring, the band activity window stops updating and remains

Hello All, The idea of having a WSJT-X having a switchable (ON/OFF) *single channel* "overlapping" feature ( e.g. W1AW TU 73; PJ7VP -15 V21AC ) with all the

Hi Bob, you should probably be using "Settings->Radio->PTT Method->VOX" when using a correctly configured SignaLink USB interface, this letting the interface do PTT control without any interference.

Hi Folks; Having issue with audio getting to rig to transmit. Have MacBook Pro w/Big Sir 11.6.1, Signalink usb and Yaesu FT 897D Receive audio is fine. WSJT preferences audio set to Codec for in and

Hello everyone, Tnx to Tim VK2XAX, this was the answer I was looking for! I try this and will let you all know the result. I shal try to install the latest version. 73 Freddy, ON7VQ

I’ve been doing that when a get borderline decoding and it stays on 4.

I found a workaround on October 31, 2021. After sending the RRR and before the other party finishes sending, click on Tx5 to select it and it will go smoothly.

Hi Bill, I though I had… turns out I’d missed the line that said “Reboot…” All sorted now. 73 Al M1FHM

Al, please take the time to read the ReadMe.txt fie on the WSJT-X installer DMG! 73 Bill G4WJS.

Since installing MacOS Monterey and running through the command to copy the sysctl file I just get the error message: cp: /Volumes/WSJT-X/sysctl.conf: No such file or directory Any ideas? Many

No, not using Omni. Seems that it’s a generic problem. David