Is your wsjtx conneted with external logger program and you are using hamlib ? Similar problem (no audio output on external usb sound card when using hamlib) I had at this moment with 2.5.4 version

Kenwood TS480 CQRLOG Running on Ubuntu 20.04.3 Hamlib 4.5 WSJTX 2.5.4 I managed to start work 2.5.4 with latest hamlib but no sound output if using hamlib rigctl. If using same soundcard for output

Hi Evan, Without knowing your interfaces between rig and PC and your settings in the rig plus Audio settings in WSJT-X it is difficult to give any advice. In any case the WSJT-X Wide Graph is not an

JTAlert already does this via the "Rebuild Alert Database" operation. This operation will scan the log you have enabled in JTAlert looking for entities that are no longer needed based on the QSL

Using WSJT-X V 2.5.4 and JTAlert 2.50.2 Windows 10 I have been manually moving countries to the 'not wanted' column in dxcc. Is there a way to say have confirmed LOTW countries in a file to be read

Likely AppData is hidden by Windows. Rather than using "C:\users\<username>\AppData\local\Hamapps" use "%localappdata%\HamApps" %localappdata% is equivalent to "C:\users\<username>\AppData\" de

Michael, Yes, the Flex goes into TX but then the audio is lost. I tried setting up a SmartCAT PPT port on the Flex that went from a virtual port to the existing physical port on the computer. The

Copy all the WSJT files at once, when WSJT is _NOT_ running, when you restart it, everything should be there. JTAlert may not create it's file structure until it's run the first time, maybe try

Just got a new (to me) Windows 10 desktop. Have loaded WSJT-X, JT Alert & AC Log to the new machine and all are working good together. Now I would like to transfer my old WSJTX and JT Alert data

I don’t mean to be repetitive. I thought I sent to the group about no waterfall. I have a new Windows 11 desktop. In ‘Volume Mixer’ in APPs section is listed WSJT-X Wide Graph. There is a

What rig is this?  Information below for trying new hamlib plus debug instructions. New hamlib for Windows installation directions #1 Shut down WSJTX/JTDX #2 Download either the 32-bit or 64-bit DLL

Hello . After latest update I receive an error saying hamlib rigctl error: Hamlib error: Invalid parameter 0000 52 50 52 54 20 2d 31 0a RPRT -1.

This all depends on a few things. 1. What is your sound device? I recommend getting this $10 sound card from amazon and use it just for digital modes. You'll have to make some

I have WSJ-Tx v2.5.4. I think I fixed the soundcard input situation I've asked in this group. CAT between TS-480 works to a degree. Test in 'Settings' is green, but 'Band Activity' and 'RX

To each his own, but it's probably better to download the current version periodically, then follow the widely recommended practice of installing each new version update into a separate subfolder

I am still on W10. So, I made the change yesterday for the monitors not to go to sleep. but executed everything else as I normally did, including locking my computer at night. When I started up WSJT-X

OK wrote:

Dennis, Let's take FCC point of view. They are only interested in what goes out of your antenna. It does not matter how you have generated the final frequency. They do measure the actual RF

Willie The answer is to disable the HDMI sound 73 Alan G4ZFQ

Starting with suppressed carrier AM... That's ordering a BLT, hold the B and L. Sorry, I don't feel like working today, so I'm goofing off. Cheers, David, N5TLZ