I added some split functions to the FT-1000MP rigs which should make VFOB work now.  Changing mode in WSJTX/JTDX from USB to Data/Pkt and back should change modes on both VFOA and VFOB. Please try

Mike, The FT-1000/FT-1000mp/MKV series transceivers do not set frequency and mode of VFOB when VFOA is set from the CAT Interface. One generally needs to set VFOA *both frequency and mode* and then

Please do this test  1004  Yaesu                  MARK-V FT-1000MP        20211014.0      Stable      RIG_MODEL_FT1000MPMKV 1024  Yaesu                  FT-1000MP   

On the MkV, you cannot set USB packet via CAT at all - you have to set it manually, and that is what happens to me. Had Yaesu provided a CAT command for the FT1000MP family to set the mode, then it

Do you mean VFOB mode does not get set as VFOA does when changing WSJTX mode from USB to USB/Data and back? Looks like I may have to fix that in hamlib. Mike W9MDB

Chuck That works better than country, thanks Still would like the enhancement 73 Steve VE5SR

The FT-1000mp only operates LSB in PKT (AFSK) mode. To do any of the WSJTX modes, you will need to use the front mic jack, select USB and *DISABLE* the speech compressor. Late model FT-1000mp

Is this a 1000MP or a 1000MP MkV? I have the latter running with a Signalink with no issues (albeit on Linux), so the hardware combo works. On the MkV, the only "gotcha" moment I hit was that when

pp? download it? 2 screens? icon for? unsubscribe from? The lack of detail is not helpful. yahoo.com@groups.io> wrote:

Is it a different set of stations or a subset? If it’s a subset then his RF isn’t going very far (antenna issues?), if it’s a different set maybe they are set to LSB as well. I forget, and

I am in the learning process on FT8 and ran across a similar issue. The radio would key but no audio. The radio worked fantastic on ssb and all the bands. Just no audio out on data. The output from

Hello Fellow hams W1KSO here, I cannot get the pp to function after i down load it, I get the 2 screens but they disappear, And the icon I placed on the desktop only gives me an option to

One of the multi-pin connectors on the rear panel accepts audio. Study the manual. 73, Jim K9YC

how to change the zone VA2VT is in CQ zone 5 not zone 2

What about sent/rec'd your gridsquare? Chuck

I would like the capability to monitor a preset number of bands for activity, ala WSPR but without transmitting. Then I could see usable openings on PSK reporter. Seeing band openings on PSK is

No we checked that. -- Jim K2QB

I believe it does. The weird thing is it works sort of. If he calls CQ for instance and we monitor the PSK Reporter only one or two stations report hearing him. Yet when I call CQ fifty-one will

What degradation in sensitivity is there in going to the wider spaced variants of Q65 for a given speed? The S/N is quoted for each speed version , but nothing on the other axis for tone

Greetings to all who responded to my needs Big misunderstanding on my part of the operating system installed on the computer. After a system crash was restored by a 2nd party, I was unaware the