My setup. FT1000MP Field and Elecraft K-3. Two sound cards, one to K-3 and one to MP. Settings are good on sound cards. K-3 works fine, both TX keying and power out., MP works for TX keying but

Thanks everyone! About 20 minutes after posting I discovered that what I wanted was in ALL.TXT. I'm finding WSJT and the modes it decodes to be quite fascinating. -- de Gary K7FR

Good morning Mike, I have just downloaded the file again, and placed it in the BIN folder, and WSJTx will start now, but I am still having the issue of it changing the radio to USB as soon as I

Well, out of curiosity I did install Commander. Not the nicest, up to date installation process - that could be a lot simpler - but it got there. First problem, it doesn't include the Elad FDM-Duo

I will try that in the morning Mike. Thanks Phil GU0SUP

I set up the N1MM logging software and the WSJT software for the VHF contest, this weekend, using the DX Commander work around. Works fine with my IC 705 and FTDX101. But, I get very little output on

I don't like reinventing the wheel but there are times when writing your own code will give you insights on how how it really works. -- de Gary K7FR

Slick, but utterly non-portable . . . The "cmake" and following line are the actual WSJTX build - the rest are simply getting prerequisites installed and "apt" is *NOT* portable across

Well, out of curiosity I did install Commander. Not the nicest, up to date installation process - that could be a lot simpler - but it got there. First problem, it doesn't include the Elad FDM-Duo

FWIW .... I agree about DX Commander, I use it to control my rig when I'm remotely controlling it and using WSJT-X.  However, Hamlib is not buggy in the sense that it causes issues in all rigs, I use

New hamlib for installation directions #1 Shut down WSJTX/JTDX #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of WSJTX/JTDX -- hopefully your browser doesn't block it but

Mike….. that’s a very slick approach - automating the build process into a shell script- kudos to you! But, at age 85, I needed all the detailed help I could get. Mr. Kahn’s ‘Heathkit’

Andy, Do this test, install the program Commander from DX Labs and use this as an interface for rig control. You select DX Lab Commander in the Radio dropdown in WSJT-X settings instead of the radio

I had the exact same problem a couple weeks ago. I finally discovered the rig control settings had changed. The software was taking my ic7300 out of data mode. Check your settings. Mode should be

Try that link one more time.  There's a new build there now. That error doesn't make any sense. Mike

Hi Mike, That's where I placed it, and when I start WSJTx, that is the error message that comes up. 73 de Phil GU0SUP

A snagette met a couple of times now. While playing around with the split or fake-it options, with Doppler correction enabled. If I'm currently in 'Fake-it', then switch the rig to SPlit operation

What Hamlib actually does is all the rig control. It's independent development of WSJT-X and is used by multiple applications to provide rig control functions. Mike W9MDB

You don't run that program directly. It just goes in the "bin" directory. Mike W9MDB

Is that when in Rig Split or Fake It? Please test Rig Split as that is what was fixed.  If there are problems send me another debug  log. Mike W9MDB