Hi, Tom:  Yes. WSJT-X may start a decode some 1.7(?) seconds before the end of a 15 second cycle and continue to decode after end end of a 15 second cycle. This depends on the (CPU speed and)

Hi, Phil: Correct me if I am wrong, but AFAIK, Dimention4 is a time-adjuster and not a time-maintainer. I was hoping for a reply of your clock accuracy such as: '/Clock is within 0.2 seconds of

Hi, Phil: Reference: Please confirm that you are seeing signals on your waterfall during a 'Tx even/1st' (or Tx odd/2nd) and in the next 15 seconds you get no decodes. Does this only occur

There is software that will, automagicly, *maintain* your clock's accuracy. It seems to me that you are using software that displays the computer's clock time and/or allows you to manually adjust

Your contacts with them are still valid for them to count them towards their contest scores. You just are not entered into the contest yourself. ⁣Jim Bacher,

Hi Tom and William, It isn't all the time, just periodically. I guess it could be RF getting back in, so I will try using less power, but I don't have issues with RTTY or PSK software, only WSJTx and

Well, I am sorry for the stations that contacted me because the contacts will not work for them. Thank you all and I'll be back for the next contest, if I can make it. 73 to

It *should*, but may not be in later variants (or updates turn it back on). Be certain to check, since this is the most likely problem for Meinberg, and will result in the error opening the port that

You pretty much have to, or it may fight Meinberg for port 123, which is what I suspect is the problem that a lot of folks are seeing. -- Sent from my Android device with K-9 Mail. Please excuse my

Inferior: Poorer time regulation, The inability to use multiple clocks and ignore those that may be unreachable. Non sliding interval thus causing more network traffic. Possibly just step corrections

Yep ... its something external to the WSJT-X code.   The MAC's QT cross-compile system has a bug that causes this.   There's nothing the WSJT-X developers can do except pass on that bug report to

Emilio, you are past the dead line, it's changed to the next contest. ⁣Jim Bacher, WB8VSU wb8vsu@... https:\\trc.guru​

You missed the Digital submission -- it was due two days ago. | Due: 2022-06-12 23:59:59Z | Mike W9MDB

But if I enter as ARRL-VHF_JUN it tells me that the frequency 14090 is not valid. yahoo.com@groups.io>) escribió: -- Saludos de Emilio, EA7QL.

It means what it says. You need to enter "ARRL-VHF_JUN" for the contest. Mike W9MDB

Now, when I finally managed to send the log, it says this and I'm lost: "Sorry! We're unable to accept your log. Please correct the problems listed below and resubmit your log. Thanks. CONTEST: (ARRL

Now, when I finally managed to send the log, it says this and I'm lost: "Sorry! We're unable to accept your log. Please correct the problems listed below and resubmit your log. Thanks. CONTEST: (ARRL

An additional challenge for those of us crazy people using Macs is that the various slider controls work in a really funky manner that is inconsistent and doesn't entirely stick. This must be due to

Yes. Although Meinberg disables the Windows time app, it is wise to specifically disable the services to prevent them from loading in the first place. 73, ... Joe, W4TV

Gary - Installing the Meinberg app https://www.meinbergglobal.com/english/sw/ntp.htm#ntp_stable installs the Meinberg NTP service and disables the Windows NTP time service. You don't have to turn off