As Reino OH3MA has already explained, the SignaLink-USB device does NOT provide any means of CAT-controlling a radio - the SL-USB is purely and solely an audio interface (although it does also

I'm trying to flesh out this information to ensure it covers all possibilites.  If anyone has suggestions on things to add to this please let me know. TestsIf problems are occurring only during

My IC-7100 is in an outbuilding, and when it keys up: 1) The camera looking at the room with the radio goes to maximum brightness. 2) The irrigation monitor thinks it's refilling the tank about

Mark, Let me ask you a question. The excerpt you sent me was from 'ntpq'. That seems to show that ntp (Meinberg) is running. When it's not running, is the Network Time Protocol Daemon' running.

Font is Arial 10 and decoded text font Courier New 10

Did you change the font in WSJTX or on your desktop scaling? Mike W9MDB

OS is W11. Sorry do not see a rulebar to attach foto's or screenshots. 73 Ronald

What OS?  Can you provide a screen snapshot? Mike W9MDB

USB cable is picking up RFDrop some coin on the best double shielded cable with factory installed ferrites on both ends.   That was my solution anyway...snap on ferrites on all the power cables and

Hi Jason, Tell us how you are connected CAT control? SignaLink supports only audio connection and a VOX based PTT. 73, Reino OH3mA

Hi Dom Yes, the distance is far from good to get a ping ! I was QRV 28.145 / 260 early this morning and heard no pings. At about 04:30 I looked at MSK144 on pskreporter and looked like the whole of EU

The new selection buttons are not fully correct displayed. The width of the box is not big enough. 73, PH7R de Ronald

Hi, Look at this one ... <https://www.maniaradio.it/en/bkttimesync.html>. I use it for nearly 20 years without any hick up. 73 de Peter, OE3EPW Am 12.08.2022 um 07:00 schrieb Mark Griffith via

I am running v2.5.4 on Windows 10 with a SignaLink and Yaesu FT-891. There seems to be an issue where I will start WSJT-X and initially all is well, but after a first transmit, the CAT control gets

Bill, Thanks for your comments.  Yeah, I'm not a Windows fan.  Spent a great many years working with Linux.  However, the software to control my Flex radio is PowerSDR, and it only works on

Something as simple as a script running ntpq and writing to a file might give you some idea of when . . . -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

I use poolntp <https://www.ntppool.org/en/#:~:text=The%20pool.ntp.org%20project,of%20systems%20around%20the%20world.> for ultimate source. I sync one or two of my machines to that, and sync the others

I personally use NTP that's geographically close to me. In my case Cornell University runs public NTP so that's my primary home NTP source. Of course when I'm portable I use GPSD and chrony to sync

Tim, This is a 4 core, 2.4Ghz CPU with 4GB of RAM, so it should be sufficient.  Perhaps more RAM might help as apps these days are RAM pigs. Not sure how to setup logging in the ntp config file. 

The key may be something else grabbing the NTP port, breaking NTP connectivity (thus the server change), and that other process dorfing the clock. The key would be to log when that happens, and then