Check that wsjt-x is hooked up to the right sound devices in the sound control panel. I have instances where the 7300 and WSJT-X are both configured correctly, but the wrong devices are being used in

But this does NOT guarantee a clear frequency if multiple callers do the same! I also am unhappy when stations call on my frequency, and I often don't respond to them. 73, Jim K9YC

So Dennis, do you recommend these rc versions for contest use this weekend or stick with 2.5.4? Ty K3MM  Sent from the all new AOL app for iOS

But task manager won't remember the settings. You can have ProcessHacker start as admin and it will reset the priorities. ProcessHacker is just superior to Task Manager in all sorts of ways. Though

Funny how on phone or cw, it seems that the human ear can pick up snd decode the strongest signal during a pileup even when we are all on the same frequency.    A smart operator seeing that no one

And if everyone does that then this offset becomes a QRM-fest where no one is decoded. WSJT-X can only do so much. Also on a busy band it may nit possible to select a slot that looks clear both ways.

I do find it annoying if a station will not answer my reply to their CQ when I am on my frequency, but will reply only when I am on their TX frequency.

The only guarantee that you can have for a clear offset at the intendent target is if you pick the same offset that they picked to transmit. That is of course if the intended target first picked a

The waterfall is only blank at your antenna.  May well be beet red half way across the world (or even closer to your antenna,) Blankness or occupation is also a function of your RF Gain --- whole

While I agree that it is good practice to look for a blank or reasonably blank spot in the waterfall, the difference between FT8 and CW and SSB is that FT8 can decode signals that are essentially on

Hi Mike, Just an fyi, you can also use the taskmgr by clicking on the detail tab, hightlight audiodg.exe click right mouse button.No need for another program. 73,  Sam W2JDB

ID020 is the TS-480 so you should not see those warnings if you use TS-480 entry. I've found what may be one possible solution for dropped audio. Install ProcessHacker -- it's a replacement for Task

Based upon my experiences in the ARRL International Digital Contest, and the recent Batavia contest, I have some suggestions to reduce NIL (Not In Log) contacts in the WW Digi Contest this upcoming

I am trying to install WSJT-X to run FT8 on a Dell laptop hooked to an Icom 7300. I see signals in the waterfall on the Icom radio but nothing shows in any version of WSJT 2.5.4 (either 32 or 64 bit)

Hi Martin, Yes I have auto seq checked and it does prompt me to log at the end of the qsl. My problem is we just keep going back and forth trying to complete the signal report exchange for it to move

Hi all... Have been using WSJT-X for a while now, off and on. SWL'ing and occasional TX use with my K2-10. Just built a QDX kit, and am back into it again. Great little rig, BTW! The questions I

I also would like to thank Jeff for sharing this script with all of us. Edd - KD5M

Dear WSJT-X Users, We are pleased to announce that Release Candidate WSJT-X 2.6.0-rc3 is ready for download by beta testers. A list of its essential changes from previous releases can be found in the

Hi all, Anyone NOT using the waterfall should not be running FT8, as it will only cause QRM... Even on a busy band, you need to ensure you are not transmitting over someone else, or you simply risk

"Possibly on very busy frequencies, like 20M, it may be of less use" I don't believe that it would be good not to use the waterfall on very busy frequencies, it's just the opposite. It is very