Should be fixed.... New hamlib for Windows installation directions #1 Shut down WSJTX #2 Download either the 32-bit or 64-bit DLL -- hopefully your browser doesn't block it but may warn you multiple

Thanks - I updated to a shielded USB cable and it solved my problems.

It is possible to make such an adapter yourself. I didn’t find such an LF adapter in the local electronics stores. Attached is a picture of an adapter I made myself for connecting a microphone,

Dear YLs and OMs, here is a problem with Mode and Split settings of WSJT-X with my Elecraft K4. Program version: WSJT-X v2.5.2 68dc11 Operating system: Windows 10 Pro, version 21H1 Transceiver:

Please describe your grounding system and how all your equipment is grounded. This is a common problem. Nice slide presentation from Jim K9YC http://k9yc.com/GroundingAndAudio.pdf As he notes...and

Thanks Filip. These are complex subjects that took me years to learn, and I'm and EE by training. But I try to explain things as simply as possible. Questions are welcome AFTER you've studied

Reduce the amount of RF in your shack. Sometimes ferrites on leads helps. 73 Alan G4ZFQ

That's a classic case of RFI. Not the symptom, the "When I turn up the power, something weird happens". 73, Willie N1JBJ

I’m struggling to get transmit working. As I turn up PWR slider to attempt to see an indication that rig is transmitting, WSJTX looses connection with rig over /dev/ttyUSB0. When I look in /dev,

Wow Jim! Acctualy I did came across RFI-Ham article of yours some time ago but sometime past half the article it was a bit too much for me at that time. I did forget about the artice and that I

Contrary to other advice on the internet, #43 and #52 are poor choices for HF chokes. Fair-Rite #31 is by far superior from 160M up to

For this case, most likely, Bill was right for the CMC path. I am using EFHW which does have a FR240-52 some 50cm from the UnUn down the feed line. However, adding another FR240-43 with appropriate

Or from the cables inside the shack acting as receiving antennas for your transmitting antenna. And the solution for RFI includes not just "a ferrite," but a #31 Fair-Rite ferrite core, with multiple

Thanks, will try that today

I'd like to thank everyone for assisting me this week! This morning, everything is going good, and I have already logged two FT8 contacts on my WSJT-X on the new Mac (Big Sur), connected to my ICOM

FWIW ... using an external USB sound card is a much better option as it will keep the computer sounds out of the audio path to WSJT-X. You can get either at Amazon: This

You can buy or make a connector to split the trrs plug into two trs jacks. one for Mic and one for speaker. Unfortunately these are not very common, but you can get them online from a domestic

Hi Bill, this is what I did not yet tested. The error is not 100% reproducable, happens not every day. I wil install the debug-version from W9MDB and will send him the log if it occurs. 73 Geza,

Bill, yes, You were on the right track. When TX is set to 5Watts the issue is resolved. RFI has totaly slipped my mind. Thank you very much for taking me on the right track! All the best, cheers! --

Hi Bill, thanks for answering. I think I should elaborate more on the subject as I have tried a few things in the meantime. First, I am not using external mouse. Using the trackpad on the Macbook Pro