I have 3 rigs that use just a usb cable for CAT and audio connection to a PC. In all of those rigs, I have to tell the rig to take its modulation input from the usb cable. If I don't tell it, it will

Hi Amos, User Guide section 10.3. Center has a paragraph: With Split operation activated on the File → Settings → Radio tab, in MSK144 and the fast JT9 submodes you can activate the spinner

Trying to configure FT8 in split operation. I want to call CQ on 14.074MHz requesting an answer on frequency 14.174Mhz. How do I configure WSJT-X to do that? Amos 4X4MF

I got my answer in another group. I’m all set. Dave, KD2SGM

Brian Check the sound settings in Settings. They could be different than WSJT. Dennis W1UE

output speaker? mmmmh Which kind of audio has your rig? Output has to be forwarded to the rif input,,, Pietro I2OIM Il giorno mar 2 ago 2022 alle ore 18:03 Brian K7BLS <K7BLS1@...>

Microsoft Surface, Win11 WSJT-X 2.5.4 Xiegu X6100 WSJTX Audio Settings Input: Microphone (2-USB Audio Device) Mono Output: Speakers (2-USB Audio Device) Mono Using FT8 CAT and PTT work fine Receive

It's true only if the audio level is well regulated (or overdrive...) the rig input. If the level is too low you will read less then with CW key down. Pietro I2OIM Il giorno mar 2 ago 2022 alle ore

I updated my HRD software to the latest version today (6.8.0.308). When running WSJT-X (version 2.5.4) from within N1MM (version 1.0.9628.0) it does not automatically log the QSO anymore - either to

No, because at any instant an FT8 signal comprises a single 'tone' that's somewhere in the audio passband between say 200 and 3500Hz. If you've calibrated something, be it an external amp or

I'm using 5 minutes. You can specify it in setup. Pietro I2OIM Il giorno mar 2 ago 2022 alle ore 15:21 Martin G0HDB <marting0hdb@...> ha scritto:

It shows the duration (in mins) remaining before the Tx watchdog timer disables the transmissions. I would venture to suggest that 15mins (or greater) is way too long - having a transmitter 'running

If you are on Windows JTAlert has single click and doesn't suffer this problem as the decodes don't shuffle around by default. Mike W9MDB

Just after posting I realized that, if AA7AA was a station that I really wanted to work badly for one reason or another, then I would certainly ignore BB7BB for a while, while I try to work the

Would you really send several replies to AA7AA? Bob said that AA7AA was calling CQ and answered some other station than him. Why continue calling when he is in QSO with the other station and someone

Hi Randy Go to Settings->General and check “Start new period decodes at top”. This will stop the new decodes from scrolling. The double-click will be interpreted as to which decode is under the

WatchDog time. It report the minutes you put in setup for watchdog cut off Pietro I2OIM aol.co.uk@groups.io> ha scritto:

What does WD:15 mean in the bottom right of the main FT8 screen?

Dave, Power ratings are based on several design factors, including voltage and current ratings for all the components in the related circuitry. In one popular solid state power amp, power handling

I am OFTEN irritated by erratic double-click results when I double-click on a decode right at the moment when one or more new decodes are posted. I have not figured out exactly how WSJTX interprets