I thought I sent a reply but I must have messed it up. I probably won't solve your problem but you didn't mention anything about your rig settings. I don't own an IC-7300 but there is some

Hi Tad, MSK144 settings: F Tol 200 RX 1500 T/R 15s MSK144/Meteor scatter takes a lot of patience and often multiple minutes to complete a QSO. There is activity most mornings - you should be-able

Hi Reino, I was already aware of the QEX document about FT4/8, but thanks for the link anyway! As far as I can see, the modulation used by FT4/8 is GFSK, ie. Gaussian-filtered FSK, as opposed to

No -- that's not how Split works (either Rig Split or Fake It). Nobody knows or cares if you are in split mode. The audio frequency is adjusted to always be in the 1500-2000Hz range.  So if  your

I am using 590SG and W10 too. (My older desktop cannot run W11 so that will not happen) too and DXLABS Commander for radio control. I have never had this problem and I hope I never do. If you find the

I suggest that we stop adding replies to this thread until after Bob NR4U replies to the first reply: https://wsjtx.groups.io/g/main/message/36791 3s, Chuck

Yep, I agree with Dennis. Getting No Decodes is an indicator that your computer clock is not syncing properly. What time syncronization software are you using? Ron - KJ5XX

The problem with that idea is the scrolling will interfere since FT8 is just a 15-second window. If you're on Windows JTAlert has a Decodes window that you can filter by callsign.  And you can also

did you confirm that Wsjt is in fact in ft8 mode, and not another mode, with ft8 frequency showing? Dave Garber VE3WEJ / VE3IE wrote:

audio codec in a signalink is able to have audio issues too. Dave Garber VE3WEJ / VE3IE

It would be nice to be able to right click in the receive window to search for a call sign or country, could this be considered for a future version? Rick NY1V

I think you mean: "it will be in my *RX* period and if within a few Hz cause QRM *to those replying on my TX frequency.*" You will still be able to QSO the other stations answering your CQs. 73,

1. I do usually set split=None. do I have to set Split=Rig? Using Flex6600 Do I have to make the radion run split? The Split functionality is used to move the radio to the new frequency at the

In your period? This never happens to me! Pietro I2OIM

Yes I understand that and am aware off the difference from SSB etc. But when the next station does the same to my previous QSO partner, it will be in my period and if within a few Hz cause QRM.

What is your "MOD Input " in your rig (I don't know what the 7300 calls it but the 705 uses this) Set>Connectors>MOD Input > set DATA OFF MOD to USB (or USB,mic) and set DATA MOD to USB. I know there

Hi Reino Thank you for trying to help that quickly. I still do not fully understand: 1. I do usually set split=None. do I have to set Split=Rig? Using Flex6600 Do I have to make the radion run

Thanks, Dennis. I was considering use of Max Dist in a non-contest situation. The algorithm makes sense (when it works) in a contest. 73, /Rick N6XI -- -- Rick Tavan Truckee and Saratoga, CA

My rig is a Kenwood 590SG and a Dell Optiplex computer running WSTJ-X version 2.5.4 under Windows 10 and 11. When I first got the computer it was set up with Windows 11, but I could not get it to

Other then calling micro soft about this stupid audio issue does anyone know the solution to the problem. I am stating to think that purchasing a signal link is the only answer John