I'm working the JT9 Activity Days event this weekend and finding that I have some UI problems in JT9 mode only. All other modes in the upper FST4 through Q65 seem to behave normally. Kubuntu Linux

Same here! Using "Dark Style" its bucking! Same version "White (NORMAL) Style" its rock solid! 73 de Peter, OE3EPW Am 27.08.2022 um 18:10 schrieb Jim Shorney:

The famous somebody should make comparison tests either just against rig background noise or with two otherwise similar receivers but different IF bandwidth and real reception of multiple

To add another data point, the display glitch on my system is only present in dark style. Normal display style works as it should. 73 -Jim NU0C "Jim Shorney via groups.io"

Chuck, Thanks for your response! I guess I solved the "No such file" error by changing to the Desktop directory where the archive was located. I now, however, receive error messages about the

I operate QRP with my FT-818 and dipole. I have to use every advantage to make challenging contacts. Bob. W7DIT

David, The place a narrow IF filter *DOES* help is when trying to copy a weak station with a very strong (local) station > 1 KHz away. The narrow filter can keep the strong station from reducing

Thanks Reino, that's exactly the myth that is starting to circulate... Dave (G0DJA)

Thanks Charlie, I'd quickly read through the User Guide and must have skipped over that section. i'll go back and cut and paste to a txt file. Dave (G0DJA)

Hi, Ed:  Please cut and paste the console text so that we can see from what directory your were in when you typed the command and the exact response from the

Gary, Thanks for the link! The instructions seem straightforward, so I will give this a try if I do not hear of any other solution other than building from source. Ed, K0KC

Ed although I haven’t yet tried RC3, I had the same experience with RCs 1 and 2 on my RPi 400. I ended up compiling from source. I used this to do

I recently decided to update my Raspberry Pi 3B+ to run under the 64-bit version of Raspbian (Debian-based) and now wish to install WSJT-X 2.6-rc3. I downloaded wsjtx_2.6.6-rc3_arm64.deb from the WSJT

From: David Tanks <ad4tj@...>To: WSJT-x Group <main@wsjtx.groups.io>Sent: Saturday, August 27, 2022 at 07:57:48 AM EDTSubject: N1MM and WSJTX: How Do I Update WSJTX that is used within N1MM?  

In my mind (until your receiver is not saturated by near sources) the larger filter is better. Filtering in digital as the SW does is more efficient and phase neutral. Pietro I2OIM Pietro (via

Hi Joe Many Thanks, I’ve kept the file, whom do I direct it to, and email address ! Regards Ken.. G0ORH Like it’s owner, this email is covid free!

We did some work to get both regular and fake it split mode working on the FTDX5000. Please try the lastest Hamlib DLL too that will be dated 220827 that will be available later

After all the years working FT8 and FT4 I STILL can't understand how so many stations answer with NO GRID SQUARE programed into their configuration!

Thank you, one and all, After setting the 706 correctly and going through the w10 computer set up, I have it all working. Made 5 contacts in the process.😊 Now, is it optimum? Tweaking over

Gary, Unplugging the microphone will take care of the problem. Turning down the microphone gain would also work. 73, Kent AA6P