Good day! How do users of the software add the country to the message? i.e. CQ DG4BRT JO43 Germany

You can narrow down the suspicion of RFI by reducing output power and/or transmitting into a dummy load. If the problem goes away, it's RFI. Even though 'nothing changed', your antenna got older,

Something like that has been asked before. You're much better off if you use a companion program like JTAlert which gives you complete control over what you see. Mike W9MDB

Here are a few additional thoughts on the 52 dB noise level mentioned in the original post. 1. USB Ports directly on the Motherboard may be a better choice than USB Ports wired to the front of the

Ray W8LYJHi Ray Those were introduced in 2.6.0-rc versions. Never been in 2.5.4. 73, Reino OH3mA

the latest version main screen the Fox/Hound, FT8, etc selections are missing. Ray W8LYJ

Guys I just got a new computer and installed latest WSJT/JTAlert/Grid Tracker. Old pc all played well together. Now WSJT will work with Grid Tracker or JTAlert but not both. I am using Port 2337

James, Have tried option in Settings > General Display are 'Start new period decodes at top'? It may be close what you want to achieve. 73, Reino OH3mA

Cornel, I suspect RF in the shack. I’ve seen similar on my side, when first starting.   I’m not saying this is true in your case, just something I experienced. My ham friends suggested using

It's hard to review the contents of Band Activity when busy by scrolling back, as each new decode forces the pane to scroll to the latest line. Could you update the widget code to only scroll when

The interface works fine, and when WSJT-x completes a QSO the confirmation window pops up so I can adjust any details and press enter to add to the Log4OM2 database. From there Log4OM uploads to

I'm using Windows 11 with an HP Omen gaming laptop to run WSJT-x alongside FLdigi and Log4OM2 and am having no issues, so it definitely sounds like a driver specific error or even possibly RF in the

I'm seeing now that the problem only occurs when the FST4W instance is loaded first. If it's started after the WSPR instance, no error. That's easy enough for me to work as a fix.

Al, It seems that Dell does not have their act together. I would complain to Dell about this problem because it appears they have loaded some crazy bloatware and thus affecting the audio function. If

All, I had some time and reconfigured using my FT-818 and Signalink interface. The audio behaves the same way. After the transmission starts the audio output to the radio starts to fall and within

I'm running two instances of WSJT-X v2.5.4 on a single PC. In one of the instances, the decode button turns blue and stays blue indefinitely, which has the effect of preventing any actual decodes.

Hi, here is the file you wanted. https://www.dropbox.com/s/vlaql55tenjm3at/WSJT-X_RigControl.log?dl=0 I hope this helps and you can say me what I am doing wrong. thank u Am 10.10.2022 um 00:39

Tom, Have you verified that your rig is switched to the correct WSJT-X frequency? Have you verified that you are still operating on FT8?

But he is not getting normal signals displayed in the waterfall. That has nothing to do with timing. Fritz KG7JLN

I have to synchronize each time I go to WSJT-X even when I close down and reopen as little as 10 minutes. I have Windows 11. I don't like Windows 11. KB2AMY