Interesting. I am having no FT mode problems but wonder what that hamspots is. I went to the link but there is no documentation at all about what it does and how to use it. Outlook LT Gil W0MN Hierro

3rd order is the most popular -- 150Hz wide and you'll see vertical bars if your waterfall isn't' saturated.I've been on a campaign for several years now helping people clean up their signals.You'll

your cq will never show on the left, that is the receive when you are not transmitting. Go to https://hamspots.net/ to see if anyone is hearing you. Thanks Dan KC2STA -- Dan Ziolkowski KC2STA SKCC

Here's a typical status display: [image: image.png] The first three are the local GPS NTP Raspberry Pi servers, one of them has both a hardwired interface and a wifi, the other is on wifi. At the

Hey guys! Thanks for getting back to me on this. Been working all week so didn't get a chance to play with it until last evening. According to your settings, Brian, I was able to get some Power

You need to update libboost. Check to see if a new package is available. Mike W9MDB

On the topic I’d shared memory… I’m running two instances of WSJT-X on my MacBook Pro (M1 Max processor, 64gb RAM) with no issues. I’d like to run a third for another radio on the bench, but

Returning to JT65 or Q65 from echo mode messages remain in the message area, but without headers. I suggest that headers be written prior to the first echo display. 73 Svend, OZ7UV

I saw 2 previous posts https://wsjtx.groups.io/g/main/topic/90423270#33713 https://wsjtx.groups.io/g/main/topic/90880159#34074 that others were having the Power Slider woking in the opposite

Not only two different settings, but two different FUNCTIONS. W4DNR

Martin - I think the 1200 baud and 9600 baud terminology was for HF and VHF packet users. Higher baud rates were used with VHF packet and the higher bandwidth FM audio path was used. It's unfortunate

I was unable to solve this for Ubuntu 22. I resorted to building the latest from source. -- --w8lvn--

don't confuse cat control 9600 for audio ( packet) input 1200. they are 2 different settings. the signalink has no cat control so 9600 baud wont change anthing unless you have a separate cat

Hi Linux mint 20.3 gives me Dependacy is not satisfiable libboost -filesystems 1.74.0 (>= 1.74.0) I did look but got fustrated, Help please! WB0ZUR Denton

Has Windows 11 decided your USB sound card input is a microphone and turned on a preamplifier? Use the old Sound Control Panel, check the sound card input (Recording tab) and look at the various tabs

If you are using the 13 pin DIN (ACC) jack, make sure the 13 pin plug is connected correctly. It is possible to insert the plug "upside down" (rotated 180 degrees). Pin 13 will fall into the key way

Martin, "I would assume that the Tx audio output from the SL-USB is connected to the MOD input on pin 11 of the 13-pin ACC connector; if the SL-USB is keying the rig but there's no audio getting

I've been using WSJT-x since it first was provided and recently the audio in level caught my eye, that is, it no longer response to the input and at startup it stands a 52 DB. Back ground -

[Snipped] Hi Kent (and all), thanks for the clarification about the menu item on the IC-706MkIIG; it does seem somewhat odd that a Baud rate setting should be used for determining the way the audio

Thanks, I'll set menu item 29 to 1200, that should fix it.