Martin, "I would assume that the Tx audio output from the SL-USB is connected to the MOD input on pin 11 of the 13-pin ACC connector; if the SL-USB is keying the rig but there's no audio getting

I've been using WSJT-x since it first was provided and recently the audio in level caught my eye, that is, it no longer response to the input and at startup it stands a 52 DB. Back ground -

[Snipped] Hi Kent (and all), thanks for the clarification about the menu item on the IC-706MkIIG; it does seem somewhat odd that a Baud rate setting should be used for determining the way the audio

Thanks, I'll set menu item 29 to 1200, that should fix it.

The default is ‘auto’ and 9600 works best IMHO just make sure the COM port is set to 9600 and wsjtx setup also set to 9600, 1 stop bit etc etc and you can hit test and light goes green. PTT must

Several times the following has happened, I don't think it has with prior versions: I make a contact on FT8. At the end of the contact, I send the RR73 macro. After my RR73 transmit ends I click on

Good news!

The latest hamlib version from https://github.com/Hamlib/Hamlib/commits/master is working fine with 2.6.0-rc4. OS openSUSE Leap 15.4, TRX YAESU FT-857

Thanks for the help Gary - I missed the part about restarting my computer. I just did it and now it works. 73, Larry, KQ6XY -------------------- Among God's creatures two, the dog and the guitar,

Martin, Yes the the radio keys just fine but no audio. It uses the 13 pin jack not the 6 pin jack.

Mike, The knob has been properly twiddled.

Jamie, The jumpers haven't been changed. It used to work I'll check them just to be sure.

Tim, You are correct it is not a TNC...oops. The Signalink is connected to the radio, with the cable supplied by Signalink, to the 13 pin connector on the IC-706.

The question should be, did RC3 save the setting, or did the regression happen before in RC1 or RC2? Neil, KN3ILZ

In addition, it doesn't correctly save the T/R interval. I've been using 10s, but when -G and Fast are set after a new session starts, it always defaults to 30s Andy www.g4jnt.com

Hi Andy I can reproduce that behaviour here also. 2.5.4 does remember fast setting and submode. 73 Charlie

I've been using JT9G-Fast, but every time I exit the programme, when I restart it come up with JT9A The Submode and the Fast flag are not being saved I've sure earlier versions didn't have this

Larry, did you restart your computer after running the sudo command in the readme? You must copy the command into a terminal, hit the enter key, then enter your password and hit enter. You will not

I am new to the wsjtx.app, and when following the instructions (ReadMe.txt, wsjtx-2.6.0-rc3-Darwin.dmg <https://physics.princeton.edu//pulsar/k1jt/wsjtx-2.6.0-rc3-Darwin.dmg>) exactly, the shmmax is

And to be clear menu 29 should be 1200 Mike W9MDB