I have Windows 11, so the drivers are already included. However, I did download the 710 usb drivers anyway from Yaesu's website. As for screenshots, I didn't know I could. So here goes Note, that

Ed, Read the beginning of this thread, https://wsjtx.groups.io/g/main/topic/94293794#38861 Notice he said that CAT is working and that he shows Com 7 and 8 in Device Manager. The USB Audio CODEC is

Nik, I have the ft10dx Have you download the USB driver for the 107 from the yaseu site? The ftdx10 has two usb drivers, one for CAT, and the for audio codecs. Secondly how about screen shots from

Turning off monitor will stop scrolling sent by ve3wej on lg phone wrote:

Yes, this is the behavior I think he is wanting... And I second it! Every time I try to look at something that has scrolled off the screen by more than a few seconds, it does not give me time to look

"I played the "test" Windows sound, that came out of my monitoring radio" Boy, that sure makes it sound like something in the Windows setup. What changes in Windows, based on the radio?

I think I also saw you mention that one radio works while the other does not. That wouldn't fit the behavior of what I was describing... :-( Does sort of make it sound like the problem is associated

Mike, He is in D-U on 10 meters. He does need to test with regular USB mode on the 891 because like I have said about the firmware bug turning OFF the data filters in D-U mode then the RX on the 891

Thanks Bruce I don't have a dummy load. I know I should, but my excuse is I'm just getting back in to radio after a break of 17 years :) So for testing, I have my radio set to 5 watts, just so I can

FSK441 does not mean the rig is using FSK mode. Mike W9MDB

*Use multicasting. When WSJT-X is configured for multicasting, it can feed UDP data simultaneously to multiple programs. My setup has WSJT-X feeding JTAlert, Grid Tracker and QLog. JTA feeds logged

Your monitoring radio is on LSB...should be on USB Mike W9MDB

The original WSJT version 10 which I believe is still available supports FSK441. See: https://physics.princeton.edu/pulsar/k1jt/wsjt.html -- John P. WA2FZW

Nik, I now see you are in DATA-U mode. Let's do these settings, have the 710 power out for 100 watts. Put the Pwr slider at MAX, put the slider in the Sound properties Speaker at halfway, In the DATA

That's really confusing, you have audio coming out of your monitor radio while WSJT-x is transmitting, so that's working. You more than likely have the audio levels set wrong, I'd guess too high as

This is an updated video showing what I have now after lots of installing, re-installing, changing cables, usb ports, etc etc https://www.youtube.com/watch?v=2uPwciTcNdU You can see that if I play

Nik, When you start WSJT-X connected to the 710 and have in the WSJT-X Radio settings the Data/Pkt selected, what is indicated in the 710 display as to the mode? Does it have DATA-U? For others this

I think he may be thinking of when he did rtty before ( fsk) Dave Garber VE3WEJ / VE3IE yahoo.com@groups.io> wrote:

WSJTX is set to use "2- USB Audio Device" for input and output which is the device that shows in device manager when the radio is plugged in. Hi Nick I would recheck all radio TX settings. Do you use

The Windows System Default is not. System default is my USB speakers. WSJTX is set to use "2- USB Audio Device" for input and output which is the device that shows in device manager when the radio is