I'm seeing now that the problem only occurs when the FST4W instance is loaded first. If it's started after the WSPR instance, no error. That's easy enough for me to work as a fix.

Al, It seems that Dell does not have their act together. I would complain to Dell about this problem because it appears they have loaded some crazy bloatware and thus affecting the audio function. If

All, I had some time and reconfigured using my FT-818 and Signalink interface. The audio behaves the same way. After the transmission starts the audio output to the radio starts to fall and within

I'm running two instances of WSJT-X v2.5.4 on a single PC. In one of the instances, the decode button turns blue and stays blue indefinitely, which has the effect of preventing any actual decodes.

Hi, here is the file you wanted. https://www.dropbox.com/s/vlaql55tenjm3at/WSJT-X_RigControl.log?dl=0 I hope this helps and you can say me what I am doing wrong. thank u Am 10.10.2022 um 00:39

Tom, Have you verified that your rig is switched to the correct WSJT-X frequency? Have you verified that you are still operating on FT8?

But he is not getting normal signals displayed in the waterfall. That has nothing to do with timing. Fritz KG7JLN

I have to synchronize each time I go to WSJT-X even when I close down and reopen as little as 10 minutes. I have Windows 11. I don't like Windows 11. KB2AMY

Hi Tom, Could it be so simple that Windows has changed security settings and don't allow microphone? I am assuming that you are using Windows 10 or 11. It is in security settings something like Allow

Using Net Time, which seems to be operating normally. Appreciate your getting back to me. Tom N3TCG

Hi folks, since fenths i change my old converter for audiosignals to an ETM-Digi1 with optocoupler, transformer, stored in an tin box. So it seems to be immune against radiation of cabling, trx and so

Hi Richard, Gee, that's old! Please upgrade to 2.5.4! Are you sure that your rig is actually /dev/ttyUSB0 ? With rig connected pen terminal and do: ls -l /dev/serial/by-id/ This will show you the

Let's try again without the HTML formatting messing it up. Please place this file as described

Windows 10 build 19044, patched and up to date X64 AMD 8 core processor, 3.5 years old, 16 GB of RAM Sometimes the behavior happens 2 or 3 times a day, other times I can go a week with no

Please place this file as described belowhttps://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0 C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will be in the

That is a really old version of WSJTX. You should upgrade and try again.  We can go from there.  2.1.2 won't even support debugging the

STUDYING the documentation for WSJT-X on the website is a great start. 73, Jim K9YC

I use 'what'...200 to 3000Hz.

If you have an older rig with an AM filter and IF Shift/Passband Tuning you can use the AM filter to extend your RX top end. If not using CAT control you do still need to watch your TX frequency to

What software are you using for time syncronization? If your computer time is off by more than a second, no decodes can be a symptom. Ron - KJ5XX