Thanks for the feedback - When attempting to start from the applications drop down this is the message: boost::filesystem::create_directory: Permission denied:

Cascading windows isn't going to work for the way I operate on FT8. I need the listing of decodes and the waterfall to be visible simultaneously. You and I apparently USE FT8 very differently, so

We have a new Windoze 10 setup. During this time, we allowed all of the patches to be installed. We loaded the USB drivers from Yaesu then configured as shown below. With nothing else other than

You can run strace when starting as non-root and perhaps see what the problem is.  Lots of info but the error will be in there somewhere. Perhaps permissions on the /dev/tty device? You apparently

From what I see, wsjt can’t be installed on Debian 11. I’m using a laptop not a PI. Is my only option install from source?

If you want to compare settings (in the radio and WSJTX) drop me a direct email as mine is working perfectly. nikthegeek@... Nick

From the WSJT-X User Guide at https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.6.0-rc3.html#_ap_decoding "f - Franke-Taylor or Fano algorithm"

I wanted to use 2.5.4 because 2.6 was still beta. Thank you for your help. I understand what I need to do so ill also reinstall 2.6 as well. 73 Antonio Luna KD9OIQ Sent from

Hi Steve, There is no indication possible that would indicate a Fox transmission on wsjt-x. That F is something else. 73 Reino OH3mA Hanki Outlook for Android ( https://aka.ms/ghei36 )

Hi Ed, A real Fox will never send an R report by design! 73 Reino OH3mA Hanki Outlook for Android ( https://aka.ms/ghei36 )

I thought I had it setup that way, but I've changed the settings on the radio so many times. I'll do another reset and then set it up the way you suggested and give it a test tonight. Thanks for the

Apologies, I should have written "cascaded". That's what I get for posting first thing in the morning. I'm not going to get into a discussion of how many text lines I see. A person can only read so

I'm using Debian 10 and wsjt-x was installed in the Ham Radio group along with the aggregator. Both the aggregator and wsjt-x have the same file permission but wsjt-x won't start without sudo.

This might sound dumb but try scrolling up on the Band Activity window. I was having trouble with decodes stopping and just on a whim, I scrolled up and the decodes were up there. It doesn't always

I assume the [F] indicator in the RX Frequency windows indicates a station in Fox mode? Can anyone confirm this? I looked through the WSJTX docs and the DXExpedition Mode online docs and didn't see

I have found that many dx ft8 foxes do not even give you back a R. They just move on to next decode and give the db report.... W1ZZ -- tia 73 W1ZZ

https://www.onallbands.com/ft8-fox-and-hound-mode/ Cell 715-660-8608 gdanielone@...

A couple of reasons.#1 There are a lot of blind callers -- ops that are not actually decoding the fox but sending TX1 anyways.  So the fox decodes them but the blind caller never decodes them to get

Mark, You can’t keep your freq from changing in the F/H mode. You should be the only one responding on that freq therefore be in the clear (by design)! The station you are trying to work is

not sure what would make it go blank, does it ever continue after a little while if you have "start new period decodes at top" with a box checked....uncheck it put a check in the next box " blank