I have 8 foot ground rod outside my Shack with no.10 wire coming back in and bonded to all equipment. Sent from ProtonMail mobile

I just upgraded my 27in iMac from Catalina to Big Sur and running the same WSJT-X v2.5.4. Has anyone noticed that double-clicking any selectable text input window like Tx, Rx or in Generate Std Msgs

Wow, I can imagine how frustrating this must be for you. I'm running Windows 10 here as well here. To get to the audio settings I mention in the presentation, you don't double-click on the speaker

I'm back to pulling my hair out with this. Fresh install of Buster, up to date as of 2030 UTC this date. Still have two dependencies that can't be installed because they are in the *experemntal*

This may have been covered, but you are in USB and not LSB mode on your rig, correct? The wrong sideband will show lots of stuff on the waterfall, but won't decode . . . -- Sent from my Android

if the interference is coming thru the modem.... put 4-5 loops into the power cord and the ethernet cable if it is long enough... homemade choke could be an interim fix KC3RRW

Hi, I take only a specific issue. That setting is used only in special activities, when you have selected Hound mode. In normal operation it is not present at all. 73, Reino OH3mA

Yes, VDSL2, Phil. Apparently each individual modem can have channels nulled out, at least on the uplink direction, which is what is causing the problem on 30m. I just haven't gone down this route yet

Ah, ok, I see. I thought you were saying it was your neighbor's modem. Sounds like you've done a good job of isolating the problem. The problem could very well be the "wallwart" power supply that

Not using Vox…. I am using CAT control… I may switch USB ports to see if that helps as well. I will post results Thanks Rich KC3RRW

Are you using VOX triggering via a SignaLink or such? Make sure your rig audio device is NOT your default audio device.  Computer sounds would then trigger PTT. Mike W9MDB

Good day all..... I am looking for wisdom.... I use an FT891 for digital and for the past 48hrs I have noted my radio is triggered to transmit at the end of a transmission cycle when I am not

Hi Steve, If it is VDSL you are talking about, the standard allows the service provider to not use frequencies in the ham bands. However in the UK, Openreach (who manage the phone network hardware)

Where are you hearing the Tx audio from? Are you sure it’s not coming out of a speaker and being picked up weakly by the radio mic? Carey Fisher careyfisher@...

Please place this file in C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will be in the same location For Linux put it in   ~/.config The WSJT-X_Rigcontrol.log file will be

Hi Unfortunately "failing to decode FT8" could be caused by a range of things. My checklist is pc time (I always get it set automatically), turn up volume on the radio (confirms there are signals),

I am just jumping in here without reading the whole thread. " Using the monitor function on the radio, I can hear that audio is getting through, but it makes no impression on the ALC meter

Semi-Break-In delay on that radio is Vox Delay This is probably not the problem but try it anyway. [image: image.png]

I'using Omnirig cespite it is based on the "old" COM technology of Microsoft. It is a way to use one radio (a only com port) with many software at the same time. I wrote my own application for a

What does Omnirig do? Never heard of it. Easy to work in conjunction with WSTX? Sent from ProtonMail mobile