Hi Mark, this is the first report of this this behaviour. What rig are you using and how is it connected to your Mac for audio, PTT, and CAT control? 73 Bill G4WJS.

Hi Mickey, it is a little worse that you describe, WSJT-X completely abandons reading of its ADIF log file is an error is detected. Unfortunately WSJT-X v2.0.0 has a couple of known defects that

I've been having a very rough time getting ft8 working in WSJT-X 2.0. Recently downloaded ver. 2.0 which seemed to go smoothly but as was the case from earlier versions, I felt I wasn't decoding

Same here. No solution. My configuration: Digital Data Modulation Path: ICOM IC-706MKIIG (ACC 13-pin)<=>SignaLinkUSB<=>Desktop PC (Windows 10 Pro v1809 & WSJT-X v2.0.0) Rig Control (CIV)

Thanks in advance to any replies OK up to version 2.0 i have always have done and lotw export from hrd and renamed file and placed it in to appdata, local, wsjt-x and renamed it as log was named ,

Hi all, I increased the font size to something really large in WSJT-X->Preferences->General->Font Size, but unfortunately now I cannot start the program without it crashing. I cannot seem to uninstall

I thought I had DX Labs, WSJT-x, SmartSDR, DAX all configured to work for FT8 but I guess not. The "DB Scale" in the lower left hand of the WSJT-X screen is showing no signal. Here are some screen

Robert Callsign SP7RB QTH JO91QS67RM www.rbalejameteo.pl Wysłane z iPhone'a

Hi Members of WSJTX@groups.io, I have a problem getting my ICOM IC-760MKIIG to work (transmit) using WSJT-X. Basically, I get the following HamLib error message every time I depress the "TUNE" button

Is there a way to select "Enable transmit" and NOT have it start transmitting if the clock cycle is between :07-:14 or when it's between :22 to :29? If so, please advise how I can enable that

When the "Enable TX" is on calling CQ it will transmit as normal calling the CQ. After doing so the software begins to receive as usual and after the 15 second receive it will not "decode" anything.

Hello, Has anyone had any issues with not being able to “decode” when the “tx” is enabled to call CQ? If the “tx” enable is off and only monitoring the software will decode as normal.

Hello All, Of late, there have been several folks experiencing problems when setting up their Linux Development Tooling across various Debian | Ubuntu based distributions. To try and alleviate

I use VNC Viewer for Remote. Everything works fine, even direct logging to HRDeluxe logbook. Brian M1HHL

Thanks, Bill All OK and log submitted. Also uploaded to LoTW. 73, Don On 1/7/2019 6:06 PM, Bill Somerville wrote:

On 07/01/2019 23:51, Don Norwood wrote: Hi Don, use "Menu->Export Cabrillo log ..." to create an entry file. Contest name is ARRL-RTTY and you must enter into an unlimited

Just finished the RTTY Roundup with modest participation. I would like to submit the contest log but don't see it in the log directory. It does pop up on screen. Can

The CQ RU CALL CALL GRID was only for stations using the ARRL RU feature of WSJTx, this was NOT a "conversion" of the standard FT8 format. They also should have been on different frequencies than the

Have to say I do not care much for the "conversion" to an RTTY type RST exchange. I just don't have any need for it. I have been ignoring those stations responding to my CQ with an RTTY response.

I see this and just assume its due to QSB fading. Since it happens to me just as the band is opening or closing most of the time. Same effect I see on SSB or any other mode as the band is changing.