hello I need help config with when working split and I upload a spot.. it uploads my xmit freq. would like to upload my receive freq and let someone know they are up. Murf n7uvh

Should be fixed in the latest DLL New hamlib for Windows installation directions #1 Shut down WSJTX/JTDX #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of WSJTX/JTDX --

I have two radios on two different USB/serial cables (both plugged into PC at the same time): FTDX-3000 on com3 (CAT) FT-911A on com6 (CAT) I have configuration settings for either radios. Switching

I started running wsjtx on WinDoze and out of frustration I am switching to Ubuntu. After install, I hooked up the USB cable and wsjtx found my rig. I didn't know how to set the audio input and

Hi Santiago I use my Mac for WSJT-X. Here is a link to an earlier discussion I used to set up my multiple

Just for information that FT4, FT8 and Q65 protocols have RTTY Roundup messages containing classical report 5x9 and for DX stations QSO serial number or for W/VE state or province. 73, Reino

Sounds like the ALC circuit.  What does your ALC meter show?Mike W9MDB

Very early TS-2000s have this ramp up problem.  (Mine, from 2001, does.)  It cannot be fixed. Larry / W1DYJ

Hi Ron, ... this is slightly OT, but one question: Do you notice a different build up of the HF of the output Power, depending on the input? From the front-in I have 100% right from the start. Rear

I have a Rig Blaster that has a microphone switch box and it goes into the front panel microphone connector. I also have a Signalink that uses the rear ACC connector. It depends on "where" someone

Hi Butch, yeah, there are just a few digital for VAQP. I thought I would try something different after many years on phone (and loss of voice even with voice keyer) The serial number issue definitely

This is the first I've heard of anybody having a problem on the TS-2000 -- not sure how many are feeding audio in the back though vs the MIC input. Mike W9MDB

The first l y thing special is a QSO Serial Number. I’m not in a position to look at WSJT-X and can’t remember if they me of the contest options will do that. Also, I recently looked at the

On Tue, Jan 25, 2022 at 05:17 AM, Dave Garber wrote: Thanks Dave, apparently I was missing an - because it seems to work now (I will try it more deeply later when I get home). This is the script: do

Hello Dave, yes i installed WSJT-X once and i Use the -rigname Option. I have two seperate transverters for the different polarisations. So i have two different sound (card) sources. IMO at the

Thanks for the input. I think I need to make sure info. would be adequate from the log to the contest. This would be my first time on digital. Many times on phone. I'll contact the Sterling Park club

Can you send me a V and H WAV file from the same time period? What I wonder is if these two could be summed and produce a better SNR.  I'm sure somebody has looked at this before.  Depends on how

Greetings, if I understand the issue, you wish to do a type of Diversity reception. I do something with SDRPlay RSP Duo in Diversity RX mode using different polarization of antennae types...e.g. a

Are you using the -rigname option for each by using 2 distinct names sent via LG hand held device yahoo.com@groups.io> wrote:

As far as logging is concerned, it shouldn't be an issue. However, depending on what is required to be passed as part of the QSO, WSJT-X contest mode may not be what is used. Neil, KN3ILZ