main@WSJTX.groups.io

SignalinkS don't have cat control in them that I ever saw so I doubt you will get it working that way

By Dave Garber <ve3wej@...> · #3435 ·

I am running the TS-2000 with a signalink and CAT control. The CAT control is using a USB-to-9-pin cable. Here are the "secrets" to successful operation.

By Ron Herring <w7hd@...> · #3434 ·

can't decode

having a problem. wsjt-x ver 2.0.1 mode ft8 i worked quite a few contacts on 10m yesterday, no problem. i switched to 20m and nothing will decode with obvious signs of strong signals, both audible and

By hvinelinux · #3433 ·

FT-4 download

Where do I find a download for FT-4 ? Tnx es 73, Mike KE4KMG

By Michael K. Boyea, KE4KMG · #3432 ·

Add Log??

OK, background: radio is an FTdx5000 running Windows 10 (1803), WSJTX 2.0.1 and JTAlertX 2.13.7...Ham Radio Deluxe 6.5.0.204. That being said for the last few days when I complete a contact and click

By Neil <n4fn.neil@...> · #3431 ·

Re: Can't transmit FT8 audio #FT8

no mention , I saw why are you not using the cat/usb port for sound and it has two cat sources, already in the ts590sg are they both broken Dave Garber VE3WEJ / VE3IE

By Dave Garber <ve3wej@...> · #3430 ·

Re: Can't transmit FT8 audio #FT8

All you need is a CAT control cable like this. No need to change out the

By Mike Black · #3429 ·

Re: Can't transmit FT8 audio #FT8

I'm using the Kenwood TS-2000. Thee Signalink says that it does not supportCAT control.. But it also says to pink none in the radio sectio, which puts the com ports out of service. So I don't know

By Dennis Jacobson · #3428 ·

Re: WSJT-X TX before the QSO party reply

Thank you, I wasn't sure if that was an intended feature or normal. 73's Komkit

By Komkit Listisard · #3427 ·

Re: WSJT-X TX before the QSO party reply

That is perfectly normal behavour. The decode is completed after the start of transmission. Roger, GW4HZA

By Roger · #3426 ·

Re: WSJT-X TX before the QSO party reply

Mine does the same from time to time. My very uneducated guess is that it is normal if there are a lot of signals to decode and the decode is at deepest. In that situation, I could imagine it to be

By n4jdt-john <n4jdt.mail@...> · #3425 ·

Recipe for Building JS8Call for Windows

Hi I've searched high and low and tried to compile WSJTX targeting Windows for weeks without success. I think I know my way around operating systems, but not enough clearly, so I am reaching out to

By G8JCF · #3424 ·

Re: Can't transmit FT8 audio #FT8

SignaLink is only for audio...not CAT control You need a CAT control cable too. That can be rig-dependent so what rig do you have? de Mike W9MDB

By Mike Black · #3423 ·

Re: icom 7600 cat

On Tue, Apr 23, 2013 at 08:30 AM, BOBBY E Chandler wrote: Anyone using a 7600 icom with a Signalink USB interface? Can't get WSPRX to control the radio. (Not mine but a friend having problem. I use

By Dennis Jacobson · #3422 ·

Re: FT8 setup#FT8 #FT8

Hello again Bill... I'm having the problem of CAT control on my TS2000. I'm guessing that. What your talking about (above) is a USB on the computer and the com port on the radio. Problem is tha the

By Dennis Jacobson · #3421 ·

Re: WSJT-X TX before the QSO party reply

It looks like you WSJT-X started to resend tje R-05, but then the RR73 came in and yours correctly switch to 73. Your QSO partner is only going to see the 73 since the second R-05 was replaced almost

By Carl - WC4H · #3420 ·

Re: WSJT-X TX before the QSO party reply

Another example - it did it again. My TX jumped the gun 235945 I am wondering if this is normal.

By Komkit Listisard · #3419 ·

WSJT-X TX before the QSO party reply

Not really sure but I have seen this a lot. My WSJT-X like to jump the gun a lot. As you as see at 234815 my WSJT-X attempting to resend R-05 but at a split second right after my party replied at

By Komkit Listisard · #3418 ·

Re: Can't transmit FT8 audio #FT8

Now my problem is that Signalink doesn't support frequency control. So it does work fine with transmit and receive, I've become supoiled with the freq. changing.. Anyone come up with a way to do

By Dennis Jacobson · #3417 ·

Re: Can't transmit FT8 audio #FT8

Found it... A little research led me to this page.. http://www.tigertronics.com/pgmsetup.htm#WSJT-X All of the different program setups are given here.... I used the one for WSJTX and it worked

By Dennis Jacobson · #3416 ·

Messages