For the clock, using Diminsion4 utility, Will have to check if the W10 Time Syncro is disabled. My understanding is that W10 clock syncro happend once a week. Either way, I'll check this. About high

Thanks for taking the time to reply Gwen. I had just completed a reformat and install of W10 at the weekend, so last night I decided to give Win4Icom another go. Installed com0com again, but this time

I guess that explains why so many thought Yahoo Groups was completely shutting down. I access everything through e-mail, including Yahoo Groups, which still works fine that way. -

I hope this will be helpful to others who may have the same issue and that it saves them some time! I had an issue whereby a particular country was not being identified in the Band Activity window,

Are you sure there isn't a lot of filtering going on (e.g., not a CQ, worked B4, etc.). -- Chuck, WB4UIH

I didn't know you could reply to posts via email. I read the posts on the groups.io web site, not via email. On the web site email replies show up as separate topics. -- Chuck, WB4UIH

I too have seen similar in recent releases. Sometimes the WF has nice signals shown, but only a couple of decodes. And yes, my DT is <0.5s for all decodes and Time.Is shows EXACT. On the next

Open?? the Windows 'Resource Monitor' and observe CPU usage while running WSJT-X .. You may notice that the missed decode periods occur when the total CPU usage is near 100%.?? You may

Thanks Zeev, That script works great! 73 Bill N9BT

I've seen this issue for some time now - a good number of versions ... AND it happens in JTDX at the same time/same sequence! So thanks Bill for the explanation. Although I'm not sure which of these

There are companion programs like GridTracker and JTAlert that can do that for you. John, WØZI

On 14/01/2020 03:49, Steve Miller wrote: Hi Steve, there are many possible causes for this, some examples: 1) clock synchronization issues. Some third-party clock sync

> WSJT-X will skip decoding a cycle for no apparent reason. > Signals are present as observed in the waterfall but nothing in that Rx cycle gets decoded. > It happens randomly while just

This is with version WSJT-X 2.1.2 using FT-8 mode but has been experienced on previous WSJT-X versions as well. WSJT-X will skip decoding a cycle for no apparent reason. Signals are present as

This is with version WSJT-X 2.1.2 using FT-8 mode but has been experienced on previous WSJT-X versions as well. WSJT-X will skip decoding a cycle for no apparent reason. Signals are present as

Well, I just learned how to do screenshots and add them to email. This is what I was referring to in my last reply. I know it works because I used it for Pitcairn Island. 73, John-N6DBF

In JTAlert, set an "Alert" for the call sign or "Contains" the following.

Your Codec ports are likely reversed.

John, I don't use an external log program with WSJT-X. I let it log internally, then import its .adi file into another log. Mostly, I was doing that at the end of 2018, when I got my KX3. I did a fair

On 14/01/2020 8:19 am, Herb Blue wrote: You can go one step further and filter on an individual Callsign and only see decodes of that Station. de Laurie VK3AMA